** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[al-]

you have a 1.6 but very workable , can we see your bios template , youlll get the answers here after that real quick

It was prime95 stable @4.0 for months, but it crashed a few times when I tried to install XP Pro to triple boot with Win7/Linux Mint KDE-

The problem was XP didn't like AHCI enabled-

Afterwards, I started getting dropped internet connections, corrupt backups, and computer freezes/lockups-

So, I decided to re-flash the bios and start over-

Here's what I have so far-

Thanks-

CPU            =E8400
Motherboard = UD3P
BIOS Version =FE 
Ram  	          =   Corsair Dominator 8500/1066
 
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .............: Auto
CPU Clock Ratio .....................: 9x
Fine CPU Clock Ratio.................: 0.0
CPU Frequency .......................: 3.00GHz (333x9)
 
 
Clock Chip Control 
Standard Clock Control
CPU Host Clock Control..................: Disabled
CPU Host Frequency (Mhz) ............: 333
PCI Express Frequency (Mhz) .........: 100
C.I.A.2........................................: DISABLED
 		
DRAM Performance Control
Performance Enhance..................: Turbo
Extreme Memory Profile (X.M.P.)......: AUTO
(G)MCH Frequency Latch...............: AUTO
System Memory Multiplier ............: AUTO
Memory Frequency (Mhz) ..............: 1066
DRAM Timing Selectable ..............: AUTO
 
Standard Timing Control
CAS Latency Time.....................: 5
tRCD ................................: 5
tRP..................................: 5
tRAS.................................: 15
 
Motherboard Voltage Control
CPU
Load Line Calibration (LLC) .........: DISABLED
CPU Vcore............................: 1.31875
CPU Termination.....1.200V*..........: AUTO
CPU PLL.............1.500V*..........: AUTO
CPU Referen.........0.755V*..........: AUTO
 
MCH/ICH
MCH Core............1.100V...........: AUTO
MCH Reference.......0.800V...........: AUTO
MCH/DRAM Ref........0.900V...........: AUTO
ICH I/O.............1.500V...........: AUTO
ICH Core............1.100V...........: AUTO
 
DRAM
DRAM Voltage .........1.800V.........: 2.10
DRAM Termination .....0.900V.........: AUTO
Channel A Reference ..0.900V.........: AUTO
Channel B Reference ..0.900V.........: AUTO