** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[Marke]

Thanks for your reply Here's my settings Time to play again anyone want to chime in with some recommended setting to see how far we can bump this up

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .............: Auto
CPU Clock Ratio .....................: 8x
Fine CPU Clock Ratio.................:
CPU Frequency .......................: 3.20GHz (400x9)


Clock Chip Control
Standard Clock Control
CPU Host Clock Control...............: Enabled
CPU Host Frequency (Mhz) ............: 400
PCI Express Frequency (Mhz) .........: Auto
C.I.A.2..............................: Disabled

DRAM Performance Control
Performance Enhance..................: Turbo
Extreme Memory Profile (X.M.P.)......: Don't have this option in my bios Why ?
(G)MCH Frequency Latch...............: Auto
System Memory Multiplier ............: 2.00B
Memory Frequency (Mhz) .........: 677- 800
DRAM Timing Selectable ..............: Manual

Standard Timing Control
CAS Latency Time.....................: 5
tRCD ................................: 5
tRP..................................: 5
tRAS.................................: 15


Advanced Timing Control
tRRD.................................: Auto
tWTR.................................: Auto
tWR..................................: Auto
tRFC.................................: Auto
tRTP.................................: Auto
Command Rate (CMD) ..................: Auto


Channel A
Static tRead Value...................:
Channel B
Static tRead Value...................:


Motherboard Voltage Control
CPU
Load Line Calibration (LLC) .........: Enable
CPU Vcore ................... 1.28750V 1.29375v
CPU Termination.....1.200V*..........: Normal
CPU PLL.............1.500V*..........: Normal
CPU Referen.........0.760V*..........: Normal

MCH/ICH
MCH Core............1.100V...........: Normal
MCH Reference.......0.800V...........: Normal
MCH/DRAM Ref........0.900V...........: Normal
ICH I/O.............1.500V...........: Normal
ICH Core............1.100V...........: Normal

DRAM
DRAM Voltage .........1.800V.........: 1.9000v
DRAM Termination .....0.900V.........: Normal
Channel A Reference ..0.900V.........: Normal
Channel B Reference ..0.900V.........: Normal

Advanced BIOS Features
No-Execute memory Protect.......................: Disabled
CPU Enhance Halt (CIE)..........................: Disabled
C2/C2E State Support............................: Disabled
CPU Thermal Monitor.............................: Disabled
CPU EIST Function...............................: Disabled

i dont have a bios template mate but i can give you some tips...btw you know you have a killer mobo ? rev 1.0 can reach amazing clocks

skews
900/900/0/50

set vtt to 1.2 and cpu ref to .785 and mch ref to .80 then up vtt to the value you want letting the other settings change

MCH volts if you are running 4GB set to 1,36

post your actual settings and i will help you better ok ?

cheers
Sergio