** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[radaja]

heres the 560fsb setting,this works for all three boards using the same ram and cpu.



7.5x560@4200 Template

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: AUTO 
CPU Clock Ratio ..........................: 7
Fine CPU Clock Ratio.....................: 0.5
CPU Frequency ...........................: 4.20GHz (560x7.5)


Clock Chip Control 
Standard Clock Control
CPU Host Clock Control.................: [Enabled] 
CPU Host Frequency (Mhz) ...........: 560
PCI Express Frequency (Mhz) ........: [101]
C.I.A.2 ......................................: [Disabled]


Advanced Clock Control [Press Enter]
CPU Clock Drive..........................: 800mV 
PCI Express Clock Drive................: 900mV 
CPU Clock Skew (ps)...................: 0ps 
MCH Clock Skew (ps)...................: 0ps 


DRAM Performance Control
Performance Enhance..................: [TURBO]
Extreme Memory Profile (X.M.P.)....: [Disabled]
(G)MCH Frequency Latch..............: [400]
System Memory Multiplier .............: 2.00D
Memory Frequency (Mhz) .............: 1120
DRAM Timing Selectable ...............: [Manual]

Standard Timing Control
CAS Latency Time.......................: 5
tRCD ........................................: 5
tRP'..........................................: 5
tRAS.........................................: 15

Advanced Timing Control
tRRD....................................: 4 [AUTO]
tWTR...................................: 4 [AUTO]
tWR.....................................: 8 [AUTO]
tRFC....................................: 68 [56]
tRTP....................................: 4 [AUTO]
Command Rate (CMD) ............: 0 [AUTO]

Driving Strength Profiles
Driving Strength ............................[AUTO]

Channel A
Static tRead Value........................: 10 [AUTO]
tRD Phase0 Adjustment..................: 0 [AUTO]
tRD Phase1 Adjustment..................: 0 [AUTO]
tRD Phase2 Adjustment .................: 0 [AUTO]
tRD Phase3 Adjustment..................: 0 [AUTO]
Trd2rd(Different Rank)...................: 8 [AUTO] 
Twr2wr(Different Rank)..................: 8 [AUTO] 
Twr2rd(Different Rank)...................: 7 [AUTO] 
Trd2wr(Same/Diff Rank).................: 9 [AUTO] 
Dimm1 Clock Skew Control..............: [AUTO]
Dimm2 Clock Skew Control..............: [AUTO]
DDR Write Training........................: [AUTO]

Channel B
Static tRead Value........................: 10 [AUTO]
tRD Phase0 Adjustment..................: 0 [AUTO]
tRD Phase1 Adjustment..................: 0 [AUTO]
tRD Phase2 Adjustment .................: 0 [AUTO]
tRD Phase3 Adjustment..................: 0 [AUTO]
Trd2rd(Different Rank)...................: 8 [AUTO] 
Twr2wr(Different Rank)..................: 8 [AUTO] 
Twr2rd(Different Rank)...................: 7 [AUTO] 
Trd2wr(Same/Diff Rank).................: 9 [AUTO] 
Dimm1 Clock Skew Control..............: [AUTO]
Dimm2 Clock Skew Control..............: [AUTO]
DDR Write Training........................: [AUTO]

Motherboard Voltage Control
CPU
Load-Line Calibration................: [Enabled]
CPU Vcore..............................: 1.250v [1.38v]
CPU Termination......................: 1.200V [1.34v]
CPU PLL.................................: 1.500V [1.57v]
CPU Reference........................: 0.755V [Normal] 


MCH/ICH
MCH Core...............................: 1.100V [1.40v]
MCH Reference........................: 0.760v [0.788v]shows up as 0.70v in ET6
MCH/DRAM Ref.........................: 0.900V [Normal]
ICH I/O..................................: 1.500V [1.50v]
ICH Core................................: 1.100V [1.20v]

DRAM
DRAM Voltage...........................: 1.9v [2.26v]
DRAM Termination ....................: 0.900V [Normal]
Channel A Reference..................: 0.900V [Normal]
Channel B Reference .................: 0.900V [Normal]

Advanced Settings
Limit CPUID Max. to 3......................: [Disabled]
No-Execute Memory Protect..............: [Enabled]
CPU Enhanced Halt (C1E).................: [Enabled]
C2/C2E State Support.....................: [Enabled]
x C4/C4E State Support...................: [Disabled]
CPU Thermal Monitor 2(TM2) ............: [Enabled]
CPU EIST Function..........................: [Enabled]
Virtualization Technology..................: [Disabled]