Quote Originally Posted by facboy View Post
hmm...my cpu is all over the place atm...well not massively. last week i was testing it at 50% LLC and it was stable all the way up to 4.2 at 1.325 (linx 100 runs, prime, pcmark and 3dmark). Then i moved the gfx card from slot 2 to slot 1 and bam, no longer stable - everything else is fine but linx has started erroring out around run 25-30. At 4.13 it seems to be fine at 1.35V 0%LLC, or 1.325 50% LLC, but even one bclk up (4.16) it errors in linx. no BSODs or anything, just linx errors out. Anybody have any ideas of what to sort out? running QPI at 1.2625 but i only have 6GB of ram.

maybe i should post a BIOS template?
Here is stats after 1 linx run, sry it aint 20 im still adjusting 0010 seems hotter thou maybe its just shows the right temps..
My cpu voltage doesnt move much at all, just my QPI with LLC OFF.

My GTX 480s is in slot 1 and 3 (maybe u should try slot 3.. its 16x too), then again i havent passed 4,2 yet cause o temps getting hairy, need to sort my WC before i can check it out.
Not sure if this means anything but my PSU got 2x 12v.. i connected both, used both EZ-plugs inntakes on the MB too but stopped using them ... seems more like those are used for 3way/4way setups.
What really fixed the last bit for me was getting right memory timings, had to up the trfc and get right rtlīs. usualy i set trfc about where i think it would be (mine ended up at 90)
and just leave the rtlīs on auto and adjusted qpi voltage until it hit a sweet spot on the rtlīs like 63-65-66
(not good timings and prbly not the ideal way to adjust them but worked for me getting linx stable)

U could try post a template i guess, thou i think others here can provide better answers since im still new at this