Code:
******************************
MB Intelligent Tweaker(M.I.T.)
******************************
Robust Graphics Booster ..............: [Auto]
CPU Clock Ratio ......................: [9X]
x Fine CPU Clock Ratio................: +0.0

>>>>> Standard Clock Control
CPU Host Clock Control................: [Enabled]
x CPU Host Frequency(Mhz).............: [467]
PCI Express Frequency(Mhz)............: [100]
C.I.A.2...............................: [Disabled]

>>>>> Advanced Clock Control..........:
CPU Clock Drive.......................: [900mV]
PCI Express Clock Drive...............: [800mV]
CPU Clock Skew........................: [ 0ps]
MCH Clock Skew........................: [ 50ps]

******** DRAM Performance Control ********

Performance Enhance...................: [Standard]
X.M.P.....[Profile 2]
MCH Frequency................: Auto
System Memory Multiplier (SPD)........: [2.40B]
Memory Frequency(Mhz).................: 1121
DRAM Timing Selectable (SPD)..........: [Auto]

>>>>> Standard Timing Control
x CAS Latency Time................5...: [ Auto]
x tRCD ...........................5...: [ Auto]
x tRP.............................5...: [ Auto]
x tRAS...........................15...: [Auto]

>>>>> Advanced Timing Control.........: [Press Enter]
(All Auto here)

****** Motherboard Voltage Control ******

>>> CPU
Load-Line Calibration.................: [Enabled]
CPU Vcore.....................1.2500V.........: [1.400V]
CPU Termination........1.200V.........: [1.280V]
CPU PLL................1.500V.........: [1.500V]
CPU Reference..........0.760V.........: [0.810]
>>> MCH/ICH
MCH Core...............1.100V.........: [1.26]
MCH Reference..........0.760V.........: [0.810]
MCH/DRAM Reference.....0.900V.........: [Normal]
ICH I/O................1.500V.........: [Normal]
ICH Core...............1.100V.........: [Normal]
>>> DRAM
DRAM Voltage...........1.800V.........: [2.10V] 
DRAM Termination.......0.900V.........: [Normal]
Channel A Reference....0.900V.........: [Normal]
Channel B Reference....0.900V.........: [Normal]
I'm trying to get this E8500 stable at 4.2Ghz, any tips?