** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[radaja]

andressergio,hope you get it figured out,as i cant wait to see you
run them at their rated specs of ddr3-2000 pc16000 6-9-6-24.but it does
look like they are rated at 2t for those speeds according to newegg?
is this correct?

[l0ud_sil3nc3]

i dont agree with you in that mate not at all, you had a normal vid X3380 experience but look at mine on the USB3P with mem that are 1600 CL7 2x2 ECO Gskills, this was done at 23C ambient closed room.



problem is with 2000 1T wich is what im investiganting, can be a bios issue i PM stasio, remeber the UD3P rev 1.0 has 10 stable BIOS...this one just 1 and 1 on beta...

USB3P rev 1.0 i can say that is stable as the UD3P rev 1.0 and with less issues like the reboots loops as on the UD3P, i just takes more time with DDR3


Luck on your new toys
Sergio

When I am saying higher memory speeds i am talking about DDR3 2000 + speeds. And don't worry I am going to find a low VID X3380, its on my list of things to hunt down. As for your overclock, its simply stunning, 1.376 actual volts for IBT stable is incredible, I needed 1.44 actual for 4.4 on air last night, but it was still very cool.

I will find a low VID X3380

[systemviper]

It will be interesting to see how that chip likes -40c and lots of Vcore....


mahaahahahmaha

[andressergio]

When I am saying higher memory speeds i am talking about DDR3 2000 + speeds. And don't worry I am going to find a low VID X3380, its on my list of things to hunt down. As for your overclock, its simply stunning, 1.376 actual volts for IBT stable is incredible, I needed 1.44 actual for 4.4 on air last night, but it was still very cool.

I will find a low VID X3380

yes i know the pain i just go for safe now and not random to get batches i can afford getting a bad chip i live in South America so i got only 1 shot

i know you will mate wasnt a shot for you is to demostrate that this mobo still rocks

now look at this i just did for you to see

4500 Mhz / 1600 6-9-6-24 room temp 23,5C



Cheers
Sergio

[andressergio]

It will be interesting to see how that chip likes -40c and lots of Vcore....


mahaahahahmaha

lol how are you mate would be awesome in cold water

[andressergio]

andressergio,hope you get it figured out,as i cant wait to see you
run them at their rated specs of ddr3-2000 pc16000 6-9-6-24.but it does
look like they are rated at 2t for those speeds according to newegg?
is this correct?

hey radaja how are you mate

dunno i just put 2 in BIOS and comes out 1 so i think some bios is messing around i talked to stasio let's see

for now i changed skews 900/900/0/50 and trfc = 100 and booted 2000 8-9-8-24 PL8 givin a bit of MCH and same vdimm runt a loop of linx and failed so almost there

i will find out or die

[systemviper]

lol how are you mate would be awesome in cold water

yea, i will be hitting it with my SS so we'll see what she's got..

I have a very sweet ud3p that lovess quads, so it should be fun to
put that x3360 thru the torture test, i got to fune tune the board for some
of the non brute force benchies....

here is what just i did with the x3360...
and it still had more, i only pushed it a little...
I need to get better fine tuning my ram and system,,,,


#1 Xeon X3360 in CPU-Z with 4717.47 mhz
#1 Xeon X3360 in SuperPi with 10sec 327ms
#1 Xeon X3360 in wPrime 32m with 8sec 676ms
#1 Xeon X3360 in PiFast with 21.08 sec
#3 Xeon X3360 in wPrime 1024m with 4min 40sec 551ms

So that X3380 should be here by the weekend, hope it cools down, it was
frekin 95 and super humid today...

[l0ud_sil3nc3]

yes i know the pain i just go for safe now and not random to get batches i can afford getting a bad chip i live in South America so i got only 1 shot

i know you will mate wasnt a shot for you is to demostrate that this mobo still rocks

now look at this i just did for you to see

4500 Mhz / 1600 6-9-6-24 room temp 23,5C



Cheers
Sergio

that is what I am talking about, 1600 cas6, any everest benches with that setup?

[andressergio]

that is what I am talking about, 1600 cas6, any everest benches with that setup?

sure mate here



Cheers
Sergio

[radaja]

hey radaja how are you mate

dunno i just put 2 in BIOS and comes out 1 so i think some bios is messing around i talked to stasio let's see

for now i changed skews 900/900/0/50 and trfc = 100 and booted 2000 8-9-8-24 PL8 givin a bit of MCH and same vdimm runt a loop of linx and failed so almost there

i will find out or die

well i know running my set at 2000 6-9-6-24 on the x58 and P55 takes a lot
of Qpi/Vtt voltage(1.40v) with vdimm of 1.66v in bios.so im not sure how much vMCH
it will take to do it on the P45.i mean thats a lot of stress on the NB to run such high
speeds and low cas.you will have to probably go from pl8 to pl 9 or 10 i would think

[andressergio]

yea, i will be hitting it with my SS so we'll see what she's got..

I have a very sweet ud3p that lovess quads, so it should be fun to
put that x3360 thru the torture test, i got to fune tune the board for some
of the non brute force benchies....

here is what just i did with the x3360...
and it still had more, i only pushed it a little...
I need to get better fine tuning my ram and system,,,,


#1 Xeon X3360 in CPU-Z with 4717.47 mhz
#1 Xeon X3360 in SuperPi with 10sec 327ms
#1 Xeon X3360 in wPrime 32m with 8sec 676ms
#1 Xeon X3360 in PiFast with 21.08 sec
#3 Xeon X3360 in wPrime 1024m with 4min 40sec 551ms

So that X3380 should be here by the weekend, hope it cools down, it was
frekin 95 and super humid today...

very nice mate i did 5005 9,2 SPI 1M thats my record on the UD3P not using anything special just water coolling at 9,5multi

Cheers and congrats on the chip show us some results

[systemviper]

very nice mate i did 5005 9,2 SPI 1M thats my record on the UD3P not using anything special just water coolling at 9,5multi

Cheers and congrats on the chip show us some results

yea, that is where i need a bunch of practice,
is tightening up the ram
figuring out better skews
and finding a nice sweet slim OS....


so lots of work/learning still to do

[andressergio]

well i know running my set at 2000 6-9-6-24 on the x58 and P55 takes a lot
of Qpi/Vtt voltage(1.40v) with vdimm of 1.66v in bios.so im not sure how much vMCH
it will take to do it on the P45.i mean thats a lot of stress on the NB to run such high
speeds and low cas.you will have to probably go from pl8 to pl 9 or 10 i would think

booted but on CL7 but still not stable and yes needs VTT and MCH for now im tightening CL6 1600

this i get now still stable

1600 6-8-8-6-24 / trfc 70 @ 1.65



Cheers
Sergio

[andressergio]

well i know running my set at 2000 6-9-6-24 on the x58 and P55 takes a lot
of Qpi/Vtt voltage(1.40v) with vdimm of 1.66v in bios.so im not sure how much vMCH
it will take to do it on the P45.i mean thats a lot of stress on the NB to run such high
speeds and low cas.you will have to probably go from pl8 to pl 9 or 10 i would think

Yes mate all my tests are on PL8 even 2000 ones but look, at 2000 8-9-8-24 i get 11k / 10.6 / 10.6 / 48 latency so if i fo less timmings and more PL it think i will quit using 2000 and going tighten on 1600 CL6 as you can see in my last pic i like that speed and easier to get stable...the ECOS couldnt hold that stable so still a nice upgrade.

Cheers
Sergio

[bluestang]

Sergio...I know you want to stay at 9x500 but I would love to see if you can get 8.5x525 with mem @ 1680 / PL8 / 7-6-6-16 (or 20) / tRFC 60. You Everest scores should go through the roof. I got this at 8x525 with above mem settings, but couldn't get it stable on the UD3LR...



Right now my 24/7 is running 8x500 with my mem @ 1600 / PL8 / 7-6-6-16 / tRFC 60...



So image what your 8.5x525 could do

[andressergio]

Sergio...I know you want to stay at 9x500 but I would love to see if you can get 8.5x525 with mem @ 1680 / PL8 / 7-6-6-16 (or 20) / tRFC 60. You Everest scores should go through the roof. I got this at 8x525 with above mem settings, but couldn't get it stable on the UD3LR...



Right now my 24/7 is running 8x500 with my mem @ 1600 / PL8 / 7-6-6-16 / tRFC 60...



So image what your 8.5x525 could do

hey mate nice speed i can do better on lower CPU speed mate for sure but i want my good 4500, will try on those settings mate and report back ok ?

Thanks for your screens

[andressergio]

some more results tweaking pumping jumping not benching as i dont have XP anymore just want to be stable

2000 9-9-8-24 1T PL8 subs tweaked @ 1,73 yes giga needs volts makes me remember my old PI1200









Cheers
Sergio

[NoGuru]

Nice work Sergio! I just ram Superpi 32 in XP at 4.5 GHz and 5-5-15 DDR2 @500 and got 11.10.541
So nice work.

[andressergio]

Nice work Sergio! I just ram Superpi 32 in XP at 4.5 GHz and 5-5-15 DDR2 @500 and got 11.10.541
So nice work.

thanks mate took me some work but going stable

[l0ud_sil3nc3]

very nice andres, that is a solid oc on the cpu and the memory oc is awesome, it is nice to see such high speed and 1T

[andressergio]

very nice andres, that is a solid oc on the cpu and the memory oc is awesome, it is nice to see such high speed and 1T

thanks mate

i was not passing memtest failed at 44% so i upped MCH to DRAM ref to .80 then passed.. went to game and BC2 made it reboot so i nothed vcore to 1.392 load and shoot blend and now im playing no issues will keep testing seems that this is hard for this mobo at this CPU speed but can do it

maybe with hypers is better dunno for now im pretty happy volts are kinda high but normal on giga, i had the same with the PIS 1200

Cheers
Sergio

[radaja]

andressergio,those are some great results there:thumb:

[andressergio]

andressergio,those are some great results there:thumb:

thanks radaja i have 24C ambient almost passed linx failed on last loop seconds before finishing, will shoot it tomorrow morning will be cooler

for now this is the most stable 2000 setup i have with nice timmings and latency

Cheers
Sergio

[andressergio]

Well i did it guys

this is my first full stable 4500 / 2000 1T setup



Cheers
Sergio

[NeoGeo333]

muy bueno Sergio, now i got the itch to get a xeon like you. This board sure got the potential.