** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[OCX600RR]

Thanks NoGuru, that's what I figured, just wasn't certain on the issue. Cheers

[kagula323]

Fan controller is installed.

nice system u have there

a friend of mine will come from the states in about two weeks ... I have Cooler Master HAF922 and wanna make a water cooling loop for the cpu only

can u make a list off the components used in your water cooling gear with links? the same request for andresergio

please provide some links from where and what to get

for andressergio: how is named that distancier between the radiator and the case and the support that holds the reservoir that clears the bubless from the loop? where can my friend order them from? (he is in the states now)

with respect
kagula323

[NoGuru]

Pump http://www.sidewindercomputers.com/swmc12vdcpu.html
Pump top, "optional" but helps performance. http://www.sidewindercomputers.com/ekwaekxforla.html
I have 10 feet of hose http://www.sidewindercomputers.com/fetuftacuvho2.html
tube cutter, but not necessary http://www.sidewindercomputers.com/kwadtucubl.html
RAD http://www.performance-pcs.com/catal...ducts_id=25389
RAD box http://www.performance-pcs.com/catal...ducts_id=25631
Metal clamps http://www.performance-pcs.com/catal...ducts_id=25625
Fan controller http://www.frozencpu.com/products/96...?tl=g34c17s286
Fans http://www.petrastechshop.com/12yalod1cafa1.html
PT Nuke http://www.petrastechshop.com/peptpcobi1.html
Res http://www.sidewindercomputers.com/swmcmire2re.html

That should cover it. I have an Enzotech CPU block, EK NB block, and a Koolance GPU block, because they where all used.
Hope this helps.

[kagula323]

Thanks NoGuru

[andressergio]

Thanks NoGuru

kagula you can check my HAF922 watercooled worklog if you want here

http://www.xtremesystems.org/forums/...=249147&page=3

Cheers
Sergio

[l0ud_sil3nc3]

well I finally got around to playing with this X3380 some more and it isn't as bad as I thought, well it loves volts but it is a freakishly cool running chip.




that was on air with a lapped TRUE w/ two San Ace fans in push pull. I can't wait to get my socket 775 backplate for my Apogee XT

[andressergio]

well I finally got around to playing with this X3380 some more and it isn't as bad as I thought, well it loves volts but it is a freakishly cool running chip.




that was on air with a lapped TRUE w/ two San Ace fans in push pull. I can't wait to get my socket 775 backplate for my Apogee XT

grats mate !!! its just a higher vid will need more volts but will be cooler on you water rig you will go to 4500 easy

[In-Fluence]

Seeing some nice clocks with the USB3P - mine's not far away apparently so I'll be joining you soon. Just one thing - I'm assuming as it's P45 the ram straps are just same and you just use higher rated dividers (e.g 2.66c e.t.c)?

[andressergio]

lo guys

i just got this on the mail yesterday (thanks T )



needed some MCH to do rated 1600 6-9-6-24 but stock vdimm

1600 6-9-6-24 @ 1,65 stock vdimm



and as im new on DDR3 and im on a P45 chipset, this mem are for P55+ i though that for 2000 9-9-9-24 1T will need more volts...i was very wrong i needed LESS MCH and vdimm to pass wich is the first time i see this

2000 9-9-9-24 1T @ 1,62 vdimm





Thanks zsamz_ for the help

Cheers
Sergio

[andressergio]

Seeing some nice clocks with the USB3P - mine's not far away apparently so I'll be joining you soon. Just one thing - I'm assuming as it's P45 the ram straps are just same and you just use higher rated dividers (e.g 2.66c e.t.c)?

hey In-Fluence

mine loves 3.20B /4.0B tough i can boot on all its has a better speed from what i tested

Cheers !
Sergio

[In-Fluence]

Cheers mate, good to hear all the dividers work ok, lots of flexibility is nice! Can performance levels go any lower or is it FSB that determines that more than divider?

Cute kid btw

[NoGuru]

Umm, I getting jealous of all the USB3P going around! Grats on the new board In-Fluance.

Love your new Ram Serg!

[andressergio]

Hey influence !

Cheers mate, good to hear all the dividers work ok, lots of flexibility is nice!

***Yes they work all need diff settings but its supposed to be like that, im happy now that i found that i dont need higher volts to make it go on 2000 1T...will reduce latency will try 2000 8-9-8-24 and 2000 7-8-9-24 and see what i can do, kit arrived yesteday and thats are my firsts test

Can performance levels go any lower or is it FSB that determines that more than divider?

***I think that PL8 with the quad at 4500 and 2000 its some limit but i need more ppl to test that so join the USB3P club

Cute kid btw

***Thanks my we are really proud of Valentino its 2,5 month now but looks like 4 lol

Cheers
Sergio

[andressergio]

Love your new Ram Serg!

Thanks mate

[Don_Dan]

Those are some very nice clocks on your new board Sergio, and cute kid as well!

[bluestang]

Nice going Serg...for both the clocks and the kid !!!

[andressergio]

Those are some very nice clocks on your new board Sergio, and cute kid as well!

Nice going Serg...for both the clocks and the kid !!!

Thank you very much for your comments guys

Cheers from South America !
Sergio

[the_real_7]

damn Sergio getting us all jealous with that new board and ram here... looks likea lot more fun for my q9650 soon

[l0ud_sil3nc3]

that memory is very nice andres, I am very glad to see DDR3 2000 on a P45 mobo, and whats crazy is it took less MCH voltage to run at higher speed with looser timings.

[andressergio]

damn Sergio getting us all jealous with that new board and ram here... looks likea lot more fun for my q9650 soon

Thanks buddy hopping more ppl can join and help its a very nice mobo, yesterday it was the first time i got a reboot loop that coudlnt recover lol i tried to boot them at XPS profile lmao 2000 CL6 had to put CMOS jumper jaaaaa but this is the first time after many OC's and 2 sets of RAM

Cheers
Sergio

[In-Fluence]

I see you've got GRID on your desktop Andre' I'm having lots of fun with that in full 1080p at the moment - my 5770 plays it very nicely on full settings. Very nice work with the memory too, let's see those timings tightened!

[andressergio]

I see you've got GRID on your desktop Andre' I'm having lots of fun with that in full 1080p at the moment - my 5770 plays it very nicely on full settings. Very nice work with the memory too, let's see those timings tightened!

thanks mate

yeah i have GRID, DIRT2 love them, i also have NFS SHIFT but could never made it not stutter...i read many ppl having this issue...inside car wont do it so i play like that

yes i will tight them for sure lets see how it goes

[andressergio]

that memory is very nice andres, I am very glad to see DDR3 2000 on a P45 mobo, and whats crazy is it took less MCH voltage to run at higher speed with looser timings.

Thanks mate

Well i dont have good news pc bsod today and it was stable yesterday...its getting kinda random at 2000 mem 1T...and for the low volts i dunno its weird maybe i need to tweak some references skews or some volts...

Any help will be appreciated, it would be nice seeing other ppl trying

Cheers
Sergio

[l0ud_sil3nc3]

well about that. . . I just sold my X3380 and my EP45T USB3P. I know its crazy but I think I am going to take a break from 775 for a while and then try to find a nice VID X3380. I am glad that the chip went on to somebody who is going to (ab)use it. . .


enjoy it steve


I am going to focus on my X5660 and my golden W3540 with a new X58A UD7 that I have coming.

Andressergio I can tell you for sure that the USB3P does not seem to clock memory high and have the ability to maintain stability as well as the UD3P.

[andressergio]

Andressergio I can tell you for sure that the USB3P does not seem to clock memory high and have the ability to maintain stability as well as the UD3P.

i dont agree with you in that mate not at all, you had a normal vid X3380 experience but look at mine on the USB3P with mem that are 1600 CL7 2x2 ECO Gskills, this was done at 23C ambient closed room.



problem is with 2000 1T wich is what im investiganting, can be a bios issue i PM stasio, remeber the UD3P rev 1.0 has 10 stable BIOS...this one just 1 and 1 on beta...

USB3P rev 1.0 i can say that is stable as the UD3P rev 1.0 and with less issues like the reboots loops as on the UD3P, i just takes more time with DDR3


Luck on your new toys
Sergio