Originally Posted by systemviper
Hi Hoss, great stuff with the uD3P,
I would love to see your template for the Q9650
in the high 4.8+ ghz to 5ghz/////
any chance of that?
best regards/steve
Thanks, Im not good at keeping track of old settings but this should be pretty close for the 5.0 spi 1m and 4.95 wprime 1024 water runs.
Code:******Motherboard Intelligent Tweaker (M.I.T.)****** Robust Graphics Booster.........................[ Auto ] CPU Clock Ratio.................................[ 9 ] Fine CPU Clock Ratio............................[ + 0.0 ] CPU Frequency 4.95GHz...........................[ 550 x 9.0] ******Clock Chip Control****** CPU Host Clock Control..........................[ Enabled ] CPU Host Frequency (Mhz)........................[ 550 ] PCI Express Frequency (Mhz).....................[ 101 ] C.I.A 2.........................................[ Disabled ] ******Advanced Clock Control****** CPU Clock Drive.................................[ 1000mv ] PCI Express Clock Drive.........................[ 1000mv ] CPU Clock Skew..................................[ 100ps ] MCH Clock Skew..................................[ 50ps ] ******DRAM Performance Control****** Performance Enhance.............................[ Standard ] (G) MCH Frequency Latch.........................[ 400 ] System Memory Multipler.........................[ 2.00D ] Memory Frequency 1066...........................[ 1100 ] DRAM Timing Selectable..........................[ Manual ] CAS Latency Time................................[ 4 ] tRCD............................................[ 4 ] tRP.............................................[ 4 ] tRAS............................................[ 10 ] ******Advanced Timing Control****** tRRD[3].........................................[ 3 ] tWTR[3].........................................[ 3 ] tWR[6]..........................................[ 6 ] tRFC[54]........................................[ 34 ] tRTP[3].........................................[ 3 ] Command Rate (cmd)[0]...........................[ Auto ] ******Channel A Timing Settings****** Static tRead Value [ 8 ].................[ 8 ] tRD Phase0 Adjustment [ 0 ].................[ Auto ] tRD Phase1 Adjustment [ 0 ].................[ Auto ] tRD Phase2 Adjustment [ 0 ].................[ Auto ] tRD Phase3 Adjustment [ 0 ].................[ Auto ] tRD 2rd (Differnt Rank) [ 8 ].................[ Auto ] tWR 2wr (Differnt Rank) [ 8 ].................[ Auto ] tWR 2rd (Differnt Rank) [ 7 ].................[ Auto ] tRD 2wr (Same/Difft Rank) [ 9 ].................[ Auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel A Driving Settings****** Drive Strength Profile..........................[ 1200 ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Channel B Timing Settings****** Static tRead Value [ 8 ].................[ 8 ] tRD Phase0 Adjustment [ 0 ].................[ Auto ] tRD Phase1 Adjustment [ 0 ].................[ Auto ] tRD Phase2 Adjustment [ 0 ].................[ Auto ] tRD Phase3 Adjustment [ 0 ].................[ Auto ] tRD 2rd (Differnt Rank) [ 8 ].................[ Auto ] tWR 2wr (Differnt Rank) [ 8 ].................[ Auto ] tWR 2rd (Differnt Rank) [ 7 ].................[ Auto ] tRD 2wr (Same/Difft Rank) [ 9 ].................[ Auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel B Driving Settings****** Drive Strength Profile..........................[ 1200 ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Motherboard Voltage Control****** Load-Line Calibration...........................[ Enabled ] CPU Vcore [ 1.15 ].....................[ 1.600 ] CPU Termination [ 1.20 ].....................[ 1.520 ] CPU PLL [ 1.50 ].....................[ 1.670 ] CPU Reference [ 0.760 ].....................[ 1.003 ] MCH Core [ 1.100 ].....................[ 1.560 ] MCH Reference [ 0.760 ].....................[ 0.963 ] MCH/DRAM Refernce [ 0.900 ].....................[ 1.230 ] ICH I/O [ 1.500 ].....................[ 1.500 ] ICH Core [ 1.100 ].....................[ 1.100 ] DRAM Voltage [ 1.800 ].....................[ 2.460 ] DRAM Termination [ 0.900 ].....................[ 1.230 ] Channel A Ref [ 0.900 ].....................[ 1.230 ] Channel B Ref [ 0.900 ].....................[ 1.230 ] ******Advanced BIOS Features****** Limit CPUID Max to 3............................[ Disabled ] No-Execute memory Protect.......................[ Disabled ] CPU Enhance Halt (CIE)..........................[ Disabled ] C2/C2E State Support............................[ Disabled ] C4/C4E State Support............................[ Disabled ] CPU Thermal Monitor.............................[ Disabled ] CPU EIST Function...............................[ Disabled ] Virtualization Technology.......................[ Disabled ]
These are my current boot settings for 5.1+ and so far are good for spi 1m up to 5.13(570).
Code:******Motherboard Intelligent Tweaker (M.I.T.)****** Robust Graphics Booster.........................[ Auto ] CPU Clock Ratio.................................[ 9 ] Fine CPU Clock Ratio............................[ + 0.0 ] CPU Frequency 5.1GHz............................[ 567 x 9.0] ******Clock Chip Control****** CPU Host Clock Control..........................[ Enabled ] CPU Host Frequency (Mhz)........................[ 567 ] PCI Express Frequency (Mhz).....................[ 101 ] C.I.A 2.........................................[ Disabled ] ******Advanced Clock Control****** CPU Clock Drive.................................[ 1000mv ] PCI Express Clock Drive.........................[ 1000mv ] CPU Clock Skew..................................[ 100ps ] MCH Clock Skew..................................[ 100ps ] ******DRAM Performance Control****** Performance Enhance.............................[ Standard ] (G) MCH Frequency Latch.........................[ 333 ] System Memory Multipler.........................[ 2.00B ] Memory Frequency 1066...........................[ 1134 ] DRAM Timing Selectable..........................[ Manual ] CAS Latency Time................................[ 4 ] tRCD............................................[ 4 ] tRP.............................................[ 4 ] tRAS............................................[ 8 ] ******Advanced Timing Control****** tRRD[3].........................................[ 4 ] tWTR[3].........................................[ 4 ] tWR[6]..........................................[ 8 ] tRFC[54]........................................[ 26 ] tRTP[3].........................................[ 4 ] Command Rate (cmd)[0]...........................[ Auto ] ******Channel A Timing Settings****** Static tRead Value [ 8 ].................[ 9 ] tRD Phase0 Adjustment [ 0 ].................[ Auto ] tRD Phase1 Adjustment [ 0 ].................[ Auto ] tRD Phase2 Adjustment [ 0 ].................[ Auto ] tRD Phase3 Adjustment [ 0 ].................[ Auto ] tRD 2rd (Differnt Rank) [ 8 ].................[ Auto ] tWR 2wr (Differnt Rank) [ 8 ].................[ Auto ] tWR 2rd (Differnt Rank) [ 7 ].................[ Auto ] tRD 2wr (Same/Difft Rank) [ 9 ].................[ Auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel A Driving Settings****** Drive Strength Profile..........................[ 1200 ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Channel B Timing Settings****** Static tRead Value [ 8 ].................[ 9 ] tRD Phase0 Adjustment [ 0 ].................[ Auto ] tRD Phase1 Adjustment [ 0 ].................[ Auto ] tRD Phase2 Adjustment [ 0 ].................[ Auto ] tRD Phase3 Adjustment [ 0 ].................[ Auto ] tRD 2rd (Differnt Rank) [ 8 ].................[ Auto ] tWR 2wr (Differnt Rank) [ 8 ].................[ Auto ] tWR 2rd (Differnt Rank) [ 7 ].................[ Auto ] tRD 2wr (Same/Difft Rank) [ 9 ].................[ Auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel B Driving Settings****** Drive Strength Profile..........................[ 1200 ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Motherboard Voltage Control****** Load-Line Calibration...........................[ Enabled ] CPU Vcore [ 1.15 ].....................[ 1.640 ] CPU Termination [ 1.20 ].....................[ 1.600 ] CPU PLL [ 1.50 ].....................[ 1.710 ] CPU Reference [ 0.760 ].....................[ 1.038 ] MCH Core [ 1.100 ].....................[ 1.600 ] MCH Reference [ 0.760 ].....................[ 1.013 ] MCH/DRAM Refernce [ 0.900 ].....................[ 1.270 ] ICH I/O [ 1.500 ].....................[ 1.570 ] ICH Core [ 1.100 ].....................[ 1.200 ] DRAM Voltage [ 1.800 ].....................[ 2.540 ] DRAM Termination [ 0.900 ].....................[ 1.270 ] Channel A Ref [ 0.900 ].....................[ 1.270 ] Channel B Ref [ 0.900 ].....................[ 1.270 ] ******Advanced BIOS Features****** Limit CPUID Max to 3............................[ Disabled ] No-Execute memory Protect.......................[ Disabled ] CPU Enhance Halt (CIE)..........................[ Disabled ] C2/C2E State Support............................[ Disabled ] C4/C4E State Support............................[ Disabled ] CPU Thermal Monitor.............................[ Disabled ] CPU EIST Function...............................[ Disabled ] Virtualization Technology.......................[ Disabled ]
Reply With Quote
Bookmarks