Quote Originally Posted by Kilyin View Post
Can't find that in the manual. Does it come enabled by default (pins 1-2) or do you need to move to pins 2-3 to enable?
VTT/QPI Load-Line Calibration is set to OFF by default. I would recommend people to manually enable it, as from using a multimeter, the VDrop on the unmodified VTT is around 0.05V, and the VDroop is another 0.05V again. So under load the real VTT value is actually around 0.1V less then what you set in BIOS. With the VTT/QUI LLC enabled, the VDrop is +.004V, and VDroop is -.005V compared to what is set in BIOS.