Quote Originally Posted by eternal_fantasy View Post
VTT/QPI Load-Line Calibration is set to OFF by default. I would recommend people to manually enable it, as from using a multimeter, the VDrop on the unmodified VTT is around 0.05V, and the VDroop is another 0.05V again. So under load the real VTT value is actually around 0.1V less then what you set in BIOS. With the VTT/QUI LLC enabled, the VDrop is +.004V, and VDroop is -.005V compared to what is set in BIOS.
It's not as bad, I measured my droop on QPI with multimeter and 1.300 bios ends up with 1.260v after droop and while linxing, while 1.3500 ends up with 1.300v. I guess I won't be swapping that jumped anytime soon just for average water cooled OC.
Quote Originally Posted by eternal_fantasy View Post
Ah great.
Well... It could have been worse!