UnOfficial EVGA X58 Classified Owners Thread

[cstkl1]

so i hard set 4 items in memory settings in bios?

1) 8-8-8-24-1n
2) TRRD 5
3) RTLS 58, 60/61, 62/63
4) TFAW 24

great lemme try and see. Wonder if it would help reduce vtt and vdimm T_T

wow those hyper x you had were dam good sticks =.=" I guess you sold it to upgrade to c7
btw cstkl bro. I spoke to bill. He said both places no stock sometimes need to wait up to 2 months for RMA.. shoot me.Anywyas he will double check on monday and let me know.

no i bought it when i was rmaing my gt 2k c7

ure damn lucky u werent the early adopters
look at the gt thread
i bought it and ed that the r2e which was certified can run .. couldnt.. so much bull by other ppl
then change to dfi.. presto it works..
then dfi release a new bios which eva and i tested on a few new settings which we recommended the rtl for it.. vtt all dropped
then measured by vdimm it ran 7-8-7-20 only at 1.656v... which is not acceptable as the reasons i gave to u above.
same proc which all this ppl last time said was my imc issue now running at 2.1k C7.

i had tested a lot of procs.. all could run 2k C7 , C0,D0. except for one that couldnt do bclk 200..
so bliz.. remember with high dram u need to have a good setup overall. mobo also is another thing.
i am running up to 2130 C7/C8 atm on ioh/ich etc all stock 1.1v

it was more apparent last time with RE and other x48 mobo's that sometime mobo batches also count for high dram overclocking.