UnOfficial EVGA X58 Classified Owners Thread

[cstkl1]

Woke up to a restarted comp T_T. But i think it went through at least 8 hours. It was at 5 hours before I went to bed last night. Need to check events to get the exact time when I get home. Any idea which item to enable in diagnostic mode to enable event viewing?

I've tried your suggestion cstkl, with lower voltages it just won't prime for more than 10 mins closest I have was 1.425 vtt and 1.64vdimm, 1 worker stopped after just 4 runs. others just restart/hang within 9 runs. I'm now trying it on the same voltages which I had on last night running for 5 hours which is 1.66vdimm and 1.45vtt with your ram settings instead of xmp ones. It passed 10 minutes but I really have to get to work. Hopefully it will still be alive when I get back from work. Now I really think its the ram since i'm able to run 4000 uncore with only 1.4 vtt with 2:8 multi. hmmm. is it safe to assume so? any idea who are the corsair reps that I should talk to for RMA? I hope it can be done fast as they are my only sticks.

1.4v for vtt sounds right

but 1.66v for 8-8-8-24.. thats a no no
think each mobo is normally different and their voltages needed are different
so the binning for 2k c8.. for a evga classy and dfi should be way less than 1.65v since boards like asus etc needs more vdimm than dfi/evga

so this ram of ures on a asus would need more than 1.66v

rma with corsair.. u have to use that online thingy on their website
they will give u the rma number
then u ship it.
always help if u give them a screenshot of memtest failing at 1.65v