success!!! I did exactly what andressergio said set vtt at 1,2 and set CPU REF at .785 and MCH REF at .80 then up vtt to ya current value...that will do the job
I wasnt setting vtt first at 1.2 then cpu ref and then mch ref and then after that I wsnt going back to change vtt back to 1.32, cause after setting it back to 1.32 it changed the two ref voltages on its own, does that make sense on what iam trying to explain, I also set it too 800-800-0-5. well after all this it passed 8 passes of IBT but my temps went to 73, is that getting abit high? It prolly wont gewt that high from everyday use as from what you guys say ibt stresses it out alot, If you have any other tips or settings for me to try please post, Hopefully no more blue screens etc. Iam happy it at least passes ibt!! cause before it was not go at 445fsb also I set my static tread value to 7 as thats what it shows it should be at with the xmp profile 1....