800D Blood+ Project

[Church]

hmm. Noeru: how about putting PSU on one of it sides and cutting out hole for it's air intake in case side wall (another option to locate it in front of case with power cord extention)? Then place side by side rad (it's hard to tell from these pics, maybe case middle section floor or case bottom needs to be cut for that .. (in both cases possibly strengthening of case structure needed?)). Probably few more hight can be recovered by taking out removable dust filters.
[edit]
hmm. or PSU in front of case, and rad laying on bottom of case? or PSU risen as much as possible till bottom of motherboard? but in such case it will suck warm air from bottom radiator. choices, choices

[noeru]

I just don't think you can have it all, my friend.

Have you considered hanging it off the back? :X

hmm. Noeru: how about putting PSU on one of it sides and cutting out hole for it's air intake in case side wall (another option to locate it in front of case with power cord extention)? Then place side by side rad (it's hard to tell from these pics, maybe case middle section floor or case bottom needs to be cut for that .. (in both cases possibly strengthening of case structure needed?)). Probably few more hight can be recovered by taking out removable dust filters.
[edit]
hmm. or PSU in front of case, and rad laying on bottom of case? or PSU risen as much as possible till bottom of motherboard? but in such case it will suck warm air from bottom radiator. choices, choices

yes Sure! To solve this problem is a custom I grow up? It is required, removal of Shadoubei bays＆5.25bays , PSU · SSD · HDD I think the aluminum panels and acrylic panels to create.Reworking of the side panel along ・ ・ ・ Umm
Bottm is TJ-07 Look? Rad 480X3?? (Bottom480x2 Top480x1)

[felix_w]

Any progress to your project noeru ?

[noeru]

Any progress to your project noeru ?

Hello, felix_w Thanks for watching
Now we are together.
"TFC Monsta Extreme Radiator 420" I'm looking for.
What meets the bottom of the TFC rad? How to supply side panels, suffering

[skinnee]

Nice worklog!

I noticed the most recent photos that the red in the loop is gone... did is breakdown or did you remove it?

[noeru]

Nice worklog!

I noticed the most recent photos that the red in the loop is gone... did is breakdown or did you remove it?

Thanks　skinnee　 We are slowly trying to change the color

[noeru]

We think
5.25 Bay new even now remains is what should make installation OCZ. Due to its size
I think the best side panels of aluminum and acrylic rebuild.

[felix_w]

Power supply will be placed where the white marked area is ?

And you gonna make new side panels for the 5.25" bay from acrylic ?

[Antioch]

Power supply will be placed where the white marked area is ?

And you gonna make new side panels for the 5.25" bay from acrylic ?

Thats what he's trying to say

[felix_w]

Thats what he's trying to say

Thanx, i just wanted to verify...

[zigzag]

i wish you luck with this noeru
btw, can i ask you the dimensions of the top rad cut out please? I have the same bitspower grill coming and want to get cutting on my case .

[charles_h]

Very interesting location for the PSU noeru, I look forward to seeing more.

[noob eater4726]

Why stop there?

Do dual XSPC's 480s, one each side!

[noeru]

Power supply will be placed where the white marked area is ?

And you gonna make new side panels for the 5.25" bay from acrylic ?

PFU Yes, I think the white portion of the inlet from the exhaust before the side panel.

Thats what he's trying to say

i wish you luck with this noeru
btw, can i ask you the dimensions of the top rad cut out please? I have the same bitspower grill coming and want to get cutting on my case .

hi zigzag http://www.xtremesystems.org/forums/...d.php?t=238950
What is this? Bitos relationship with the size of the cut?

[noeru]

Very interesting location for the PSU noeru, I look forward to seeing more.

Hi　charles_h
I'm glad of you interested in you! Thank you very

Why stop there?

Do dual XSPC's 480s, one each side!

If you want to try 480x2+360　

[zigzag]

Hi Noeru! The length and width of your 480 cut out?? I have the same rad aswell, xspc 480. Was hoping to get a head start on the cuts before my bitspower grill arrives

[avddreamr]

We think
5.25 Bay new even now remains is what should make installation OCZ. Due to its size
I think the best side panels of aluminum and acrylic rebuild.

You could do that, and it may even be easier to use one of the new antec psu that are 120mm high, and place the fan their. It would greatly simplify cooling.
Although, I dont think they go up 1000w, but you may not actually need 1000w.

Another idea, is to use one or two rx360 instead. I think you have 572mm on the base to play with. The rx360 is 410mm, so that leaves 172mm to play with. It would still force you to get creative with psu mounting. You could either get a short psu and get very very creative, or fab a psu extender.
Or you could fab up a new psu case to work with that small ammount of space, just depends how comfortable you are with cracking open your psu.

Either way you have your work cut out for you. It's funny, no matter how big a case gets, you always can think of ways of where you just wish it was just a bit bigger.




Amazing build. btw

[noeru]

480x2 is now going to be a little further
980X in anyway

[noeru]

intel i7 980X 5027.4MHz　Water cooling
EVGA X58 SLI Classified 141-BL-E760-A1
Corsair TR3X6G2000C8GTF-DOMINATOR GT 2Gx3
GeForce GTX295x2 Quad　SLI
Intel X25-M Mainstream SATA SSD SSDSA2MH080G2C1x2 raid0
HGST/HTS723232L9A360x2
Corsair Obsidian 800D BLOOD+
OCZ Z Series Gold 1000w Power Supply

[Omarko]

how did you manage to put the RX240 sideways at the bottom ?

once I put it in , I can not turn it around as its too thick

?????

[noeru]

how did you manage to put the RX240 sideways at the bottom ?

once I put it in , I can not turn it around as its too thick

?????

helo Omarko
RX240 is I had a hard time
Remove the center plate rivets work is easy.Fan and stopped in, you must work under the mouth



Attachment 103535

[ScottALot]

Take some pix of your dachsund! He's so damn cute.

[00011011]

Noeru, great work! you have greatly inspired me on my first water cooled system. I am also using the i7-980x. Obviously the lower the better, but in your opinion (or anyone who could ring in on this) what would you consider the highest core temps you would feel safe for a 24/7 overclock (assuming stable)?

Currently I'm @ 4.3 GHz. I haven't run any overnight tests yet, but after 10 minute small FFT torture tests, my hottest single core temp maxed at 77 at some point, but running average of all six is 72.

And when running Prime95 torture test, which is it best to run? Small FFTs (ram not tested much), In-place large FFTs (max heat, some ram tested), or Blend (lots of ram tested)?

[Gonzalo-Gonads]

Now get it crunching!

No but really amazing job! I think a 480 rad will be pushing it alittle eh?

P.S. get it crunching that thing would be a beast at wcg

[The.Sorrow]

HI

Amazing project dude.

Can u just tell me , is that a conector witch are in the midle of the 1 gt295 and the second, or is a junction of males and females conector?
if its a conector can u just give me the exact name?

I love it,, the look man..

Congratzz