800D Blood+ Project

[noeru]

Hello All

Thank you for seeing work the plan ..me.. ..poor...
As for the plan, it thinks about two rajieta by "Corsair Obsidian 800D".
CPU:corei7 920
mobo:EVGA X58 SLI Classified 141-BL-E760-A1
XSPC480and240

■Intel Xeon w3540
■EVGA X58 SLI Classified 141-BL-E760-A1
■Corsair TR3X6G2000C8GTF-DOMINATOR GT 2Gx3
■XFX/GeForce GTX295x2 Quad　SLI
■Intel X25-M Mainstream SATA SSD SSDSA2MH080G2C1x2 raid0
■HGST/HTS723232L9A360x2
■PIONEER DVR-S17J-BK
■case：Corsair Obsidian 800D BLOOD+
■Power：OCZ Z Series Gold 1000w Power Supply
■HYUNDAI W240D
Singl roop 　
■Watercool HEATKILLER CPU Rev3.0
■EK-FB EVGA X58 CLASSIFIED Acetal+Nickel
■MIPS　mch2255
■EK-FC295 GTX SLI - Nickel
■DDLaing DDC 3.25 12 VDC Pumpｘ2 XSPC Premium Laing Dual DDC Clear Acrylic Top
■Alphacool HF 38 Cape Cyclone 250
■Top/XSPC RX480 Bottom/XSPC RX240 x2
■Tygon 3603 1/2" ID (3/4" OD) Clear Tubing/Tygon 3400 1/2" ID (3/4" OD) Black Tubing
■Bitspower Premium G1/4" High Floｗ compression Fitting
■Feser One F1 Cooling Fluid - UV Red+Feser One F1 Cooling Fluid - UV Purple mix
■Sleeve：MDPC・Mylis TECHFLEXinc
■Enamax CLUSTER UCCL12cmx25mmx6:/Cooler Master High Performance 120MM R4 Series RED LEDx4：/Aerocool RS12 Carbon Fiber Edition Redx1：kaze-just-slim　12cmx12mmx3
■aquaero 4.00 USB Fan-Controller, VF-Display/ZALMAN　ZM-MFC1 Plus-BK

[hale88]

yeh another Corsair 800D love it. But can you post some quality pics?

[noeru]

Originally Posted by hale88

yeh another Corsair 800D love it. But can you post some quality pics?

Originally Posted by noeru

Brand-new Corsair 800D

[noeru]

To put XSPC480 in the start, the ceiling is processed.

[noeru]

To put XSPC480 in the start, the ceiling is processed.

[noeru]

To install 360→480 from here to the ceiling, it processed it.
Bitspower　Radiator Gard Mesh 480





In addition, the installing position was moved behind 15mm.

[noeru]

It cuts it here with a jigsaw.



Laser line jigushi

[noeru]

Xspc480

[Khoral]

I was wondering if a 480 could fit in this amazing case, thank you for showing me that it's possible

And of course, flagged

[noeru]

Thank you.

I install 240 in the bottom as follows.

[Hellmann]

Amazing keep workin', where will u put the other radiator?

[noeru]

To set up 240, I remove 3.5-inch bay.

It is necessary to remove a lot of rivets to detach this.

[noeru]

To set up 240, I remove 3.5-inch bay.

It is necessary to remove a lot of rivets to detach this.


Bitspower Radiator Gard Mesh 480

[Mash]

noeru, your workplace looks like Mirror's Edge hallways
800D is great, good luck with the project.

[hale88]

Nice cut dude...It looks tight

[noeru]

By the next work in the lower part of XSPC240 install it

I remove a shadowbay and empty a vent into the base

[noeru]

[noeru]

I thank for encouragement!

I put XSPC240Radiator at the bottom

[alacheesu]

Looking good so far.

[Weevil]

Subscribed, nice work, I like this case.

My wife likes your puppy in your profile pic, wants to know if that's a miniature dachshund?

[noeru]

Hello Weevil
yes
The child of the third and the fourth of my home is miniature Daks.
she is Dapple color

[Garrett]

Originally Posted by noeru

I thank for encouragement!

I put XSPC240Radiator at the bottom
Attachment 98813

Attachment 98814

Attachment 98815

Attachment 98816

Attachment 98817

I have been waiting for these photos oh yes
Can you tell me how many millimetres you have left if the radiator is on its side?
I bet not even 3mm, right?

You see I want to put 2 Quad radiators in that bottom compartment and the PSU on top (it can be done) so I'm afraid my PA120.4 is a bit too high with its 129mm width...

I would be helped a lot if you could give me that info

Great build man, I will follow this one for sure

[Weevil]

Originally Posted by noeru

Hello Weevil
yes
The child of the third and the fourth of my home is miniature Daks.
she is Dapple color

<------This one here is Pierre, and his uncle Jack is not pictured, they are wire haired miniatures. Love these little guys,

[punkycorsa]

Nice build! Is it possible to sandwich two duals at the bottom?

[Garrett]

It should be, you mean two dual rads on their sides and fans at each side?
I don't see why not