Quote Originally Posted by rastakouer View Post
On my system, a too high Vcore makes my system getting 85/90 °C and BSOD. So I've found a stable config by reducing my VCore. For the RAM I know my GSkills need 1,65V. In the bios you only find Vdram 1,66 so choose it, the real voltage is a little under the bios value. And try relax your ram timings if you have problems. (even to 10-10-10-34) If with relaxed RAM timings you are not stable, so your pb is your CPU settings...

hi Guys
believe running triple is better than dual, my mobo will not let me run the cpu@4ghx and the dual ram@2000mhz - does not like it. was able to get the ram @1900 8-8-8-24 - was insanely quick - under everest memory latency was 33.1 - was quick - could as you said only run cpu@3.8 i am sure its possible to push further with the right settings but you would have to be pretty knowledgeable to get the desired results.

brings me on to my next problem, i reverted back to my triple set as i like running more ram and also having the cpu@4.0 but it wont let me run as before??? same settings 1600mhz@ 8 8 8 24 bclk 200 x 20 multi - tried more vcore than before and it wont boot, its a bit unstable @ 3.8 1540 mhz ram
i am really puzzled as to why its doing this, looks like i might need to go to 3.6ghz for stability, any ideas would be much appreciated.

think i am going to update the bios to f10 and see if that helps.have a good day all

- FEW DAYS LATER-LOL-

hi m8
I got the cpu reasonably stable@ 21x191- it seems to prefer the 21x multi - hates 20x200 surprisingly as i had it like this at first and it was fine for 1 week until i put the dual set in,was ok and managed to run thisset '1900mhz 8-8-8-24 but after removing it and reverting back to triple set, i cant get my 1600mhz 8-8-8-22 or my 20x 200 - how weird is that, since then i have been struggling, wish i had not bothered with the dual set to be honest.
I did updateto the f10 bios hoping for better, glad that i can run 21x191 but whats the deal with the ram, from 8-8-8-22 1600mhz 1.5v now i struggle with 9-9-9-27 1520@ 1.66v lol whats happened dude, any ideas would be great, so many bsod,???
regs
paul