GTX285 various mods.. which may work for GTX260/280/295 also

[Brama]

I have a couple of questions:

- on first picture (page 1 of this thread) of Napalm mods there is a 10 ohm resistor connected to ground labeled OCP mod, from same point of Crotale mod but he suggest a 15 kohm resistor. Why this difference?
I put a 15 kohm between Crotale point and ground but sometimes I have OCP triggering in, even at 1.29 V. Which resistor value do you suggest?


- I connected also the 150 ohm resistor of Napalm mod #3 to ground (mod #1 and #2 already done) but I have only 1.29 V. Can I lower or increase this resistor to get more volts, i.e. around 1.35?



Thanks in advance and bye.