Gigabyte EX58-UD5/Extreme Discussion Thread

[DavyBoy]

1860MHz @ CAS6 is really good mate, although, 1 pass of Memtest isn't enough imo, I usually leave it running for at least 8 hours when checking my RAM..

@Bex, for that 4.7GHz CPUZ validation, I just set Vcore to 1.45v (BIOS) Vtt @ 1.335v, and all other voltages are the same as in my post above.

What I had to do to reach 224Bclk was set it to 222MHz in the BIOS, and then once I was in Windows, I used SetFSB to bump it up to 222MHz, as the UD5 has a 222 Bclk wall, so anytime I tried to push more than that via the BIOS, it wouldn't even POST.

The highest I have had Bclk so far was 226MHz, but I can't find my CPUZ validation that I did...