Doesn't eleet show NB & VREG temps???
Nice review...thanks![]()
Doesn't eleet show NB & VREG temps???
Nice review...thanks![]()
[CENTER]The post counter is not an intelligence meter!Originally Posted by Massman
MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
Heat Team IRONMODS
Nope, only VREG.
XSPX RX360 - Nanofluid - Laing DDC/MCP355 Tops - 120 vs. 140 radiator - Temps in relation to Flowrates - EK Supreme orientation on i7 - Stacked Radiators - Triple-Radiator roundup - Waterblocks on i7 - Triple DDR3 Roundup - OCZ Hydroflow i7 mod - EVGA Classified MB blocks - Huge Radiators - Rampage II Extreme MB blocks - Flowmeters
So did you get your VREG #s from eleet for from the BIOS like the NB results?
[CENTER]The post counter is not an intelligence meter!Originally Posted by Massman
MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
Heat Team IRONMODS
From HWmonitor, which reads the same info as eleet.
XSPX RX360 - Nanofluid - Laing DDC/MCP355 Tops - 120 vs. 140 radiator - Temps in relation to Flowrates - EK Supreme orientation on i7 - Stacked Radiators - Triple-Radiator roundup - Waterblocks on i7 - Triple DDR3 Roundup - OCZ Hydroflow i7 mod - EVGA Classified MB blocks - Huge Radiators - Rampage II Extreme MB blocks - Flowmeters
sorry to bring up an old post but it is a good one.
Does this require a seperate loop or can i put this in the same loop as my CPU?
__________________________________
[ EVGA X58 Classified ]
[ Intel i7 920 ] --- D0
[ Sapphire 4870x2 ]
[ BenQ G2400WD 24" Monitor]
[ 3 x 2GB G.Skill Trident DDR3 ]
[ Corsair 850HX 850 watt PSU ]
[ Auzentech Prelude ]
[ beyerdynamic MMX300]
[ Logitech G15, G9 , G7, MX518]
[ Saitek X52 ]
[ 4 x Samsung Spinpoint F3 500GB ]
[ 1 x WD 150GB Raptor ]
[ 1 x Seagate 500GB 7200.11(32mb) ]
[ Windows 7 64-bit]
Water Cooling Setup
U2-UFO Black Powder Coat - 3 Big Window
Swiftech MCP-655 aka Laing D5 Vario w/ EK Top
Thermochill PA 120.3
Swiftech XT CPU Block
EK Classified Full NB/SB Block
EK-MultiOption 4 Port RES 150 Rev. 2
NZXT Fan Controller + Sunbeam Multi Fan Port
7/16" ID (5/8" OD) Primochill Black Tubing
7 x Yate Loons-D12SM ‘s
Bitspower Compression barbs
I'm doing one loop that has this block and CPU together. Gonna be a bit before I get it up and running, but from what I've read, should be fine.
In Progress:
EVGA X58 Classified w/EK-FB full board block | Core i7 920 w/ Enzotech Sapphire | 6GB Gskill Trident F3-16000CL9T-6GBTD | ATI Radeon 4870 1GB | Hitachi 320GB HD x2 | Hitachi 1TB HD x2 | PCP&C Silencer 750W PSU | D5 Vario w/EK-D5 v2 | MCR320-QP w/cheap Yates (for now)
thanks for share![]()
WAITING FOR SOMETHING... FULL LIQUID BY YBRIS Ybris A.C.S. FULL CHROME Limited Edition N°058 | Ybris A.C.S.-G FULL CHROME Limited Edition N°058 | SANSO PDH-054 12V A.F. | Feser Xchanger Q.R. 480 with Feser Xtender blue\Scythe Ultra Kaze 3000rpm | Tecnofront Bay Trap | Tygon R-3606 3\8" 1\2"![]()
I also think that putting your MB in a separate loop is overkill. But some prefer it.
What I can say for sure is that it's not necessary to have your MB in a separate loop. You can do it and it might give a small temperature advantage, but it's far from necessary.
XSPX RX360 - Nanofluid - Laing DDC/MCP355 Tops - 120 vs. 140 radiator - Temps in relation to Flowrates - EK Supreme orientation on i7 - Stacked Radiators - Triple-Radiator roundup - Waterblocks on i7 - Triple DDR3 Roundup - OCZ Hydroflow i7 mod - EVGA Classified MB blocks - Huge Radiators - Rampage II Extreme MB blocks - Flowmeters
nice test! congratulations.
I have one more doubt is no difference between the block for the e759 and e760?
and where they think this EK blocks mainly with acrylic cover? any store that makes sending to the world!
SORRY FOR MY BAD ENGLISH!
Bookmarks