GTX285 various mods.. which may work for GTX260/280/295 also

[andressergio]

alright.. well youve only done step 1

read/look thru the 3 step vgpu mod post:
http://www.xtremesystems.org/forums/...&postcount=237

step 2 - pencil gets you more.. or replace the resistor with a 500 ohm vr set @ 300 ohm

step 3 - 500 ohm vr set @ 200 ohm gets you more/closer to the 1.39v limit

if the bridging of the vids is done properly you can get ~1.39vgpu

once you reach above 1.3vgpu you gotta perform crotales ocp mod.. start @ 10k ohm vr and if you have to lower it.. you can go as low as 1k ohm no problem

all together it mounts to 4 steps

benefits of the 4 steps ? if all 4 done properly you wont lose any mem clocks.. youll gain core shader and mem clocks

cheers

Im wondering if my card has some OCP or OVP under your voltajes as i had some issues for ex i get brown screens or blue while playing, i measured and load vgpu is still 1,22ish... so i dont know what im on doubt is that i can get vmem go higher no matter the vid i connect i just keep getting the same...

Currently im playing and passed zillions of gpu tests at 792/1764/3024 at 1,22ish loaded...bench i could go to 800/1764/3096 as i posted my 3DM06 in this thread but not to play Crysis for ex but yest on the first clocks i mention...as im on water i think that my best bet is to rebuilt and hard mod it the good way

i will try to pencil and see what i can get

Thank you very much for your help
Sergio