GTX285 various mods.. which may work for GTX260/280/295 also

[NapalmV5]

alright.. well youve only done step 1

read/look thru the 3 step vgpu mod post:
http://www.xtremesystems.org/forums/...&postcount=237

step 2 - pencil gets you more.. or replace the resistor with a 500 ohm vr set @ 300 ohm

step 3 - 500 ohm vr set @ 200 ohm gets you more/closer to the 1.39v limit

if the bridging of the vids is done properly you can get ~1.39vgpu

once you reach above 1.3vgpu you gotta perform crotales ocp mod.. start @ 10k ohm vr and if you have to lower it.. you can go as low as 1k ohm no problem

all together it mounts to 4 steps

benefits of the 4 steps ? if all 4 done properly you wont lose any mem clocks.. youll gain core shader and mem clocks

cheers