How Many Cores?!?!?!

[chew*]

can u try Cinebench run? And winrar benchmark?
wprime is better with the same HT: NB (2000:2000, 2400:2400 etc). Example with 2000MHz HT and 2600MHz at NB is run whorse. But i think, u know it

I think he can't adjust it.

This is not an overclockers board......if he could adjust he wouldn't be writing scripts to OC all cores he would just flip multis in bios

S7 advanced tab on wprime 1.55, set to 24 cores

[s7e9h3n]

I think he can't adjust it.

This is not an overclockers board......if he could adjust he wouldn't be writing scripts to OC all cores he would just flip multis in bios

S7 advanced tab on wprime 1.55, set to 24 cores

Yep...frequencies aren't adjustable. Only multi:

1.55 seems a lot slower:

[s7e9h3n]

Any programs out there that adjust memory timings?

[EnJoY]

Any programs out there that adjust memory timings?

I really wish codered still developed A64tweaker. Remember how vital that used to be for BH5 tweaking back in the day? I don't think anything aside from AOD allows you access and adjust to all the memory timings. And especially not for the board you're on.

[chew*]

Try installing Amd Over Drive S7, no clue if it will work though, it might not detect AMD cpu if anything can fool with ram in the fly its that......might be able to raise HT bus, etc bump NB and HTT

BTW if this is sleeping I want to see you Work.

[shadow_419]

snip.
BTW if this is sleeping I want to see you Work.

lol! For real! S7 is pumping out benchies with one eye open it seems.

[s7e9h3n]

Try installing Amd Over Drive S7, no clue if it will work though, it might not detect AMD cpu if anything can fool with ram in the fly its that......might be able to raise HT bus, etc bump NB and HTT

BTW if this is sleeping I want to see you Work.

Well, that was a complete failure...lol:

[ubuntu83]

BTW if this is sleeping I want to see you Work.

I think he is as excited about it as we are and missed it a lot when he was away.

[justapost]

Any programs out there that adjust memory timings?

As always baredit/crystalcpu and the bkdg.

[Daveburt714]

Any programs out there that adjust memory timings?

Hey s7, this memory tweaker worked quite well on Phenom I's...
Might be worth as shot...

http://www.xtremesystems.org/forums/...ad.php?t=92190

[Lightman]

I was going to say AOD for tweaking memory, but you already find out it's not working. Still it would be worthy giving a shot with AOD 2.1.4. That was the version which worked without knowing the CPU and while newer releases were crashing on my PC this one was happy bunny! The only drawback was lack of info in some tabs ...

EDIT: Also AOD feels best on XP or Vista OS ...

[Don_Dan]

Any programs out there that adjust memory timings?

Have you tested CPU-Tweaker by FELIX?

[justapost]

That setup has four memory controller, all those apps only support one controller.
Chapter 3.5 here shows the pci register specs.
http://support.amd.com/de/Processor_TechDocs/31116.pdf
In BarEdit their should be four pci devices for the different memory controllers. I tested it on an agena single socket system last year and it worked.

[s7e9h3n]

It's cooler today



I'm getting a bit tired of WPrime. I'm going to grab a 4890 and throw it in the system. Probably won't have results till the weekend, but I'll try to get some 3D runs in.

[EnJoY]

It's cooler today

I'm getting a bit tired of WPrime. I'm going to grab a 4890 and throw it in the system. Probably won't have results till the weekend, but I'll try to get some 3D runs in.

How many threads can 06 and Vantage utilize?

[blindbox]

It's cooler today



I'm getting a bit tired of WPrime. I'm going to grab a 4890 and throw it in the system. Probably won't have results till the weekend, but I'll try to get some 3D runs in.

http://www.hwbot.org/hallOfFame.do?t...plicationId=15

hwbot says you're third

Are the multi's unlocked on the processors?

AFAIK, you can somehow 'disable' CnQ by setting all the P states to the same voltage and multi.