** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[dnottis]

Installed F9 here, seems to be fine.

[Hoss331]

nuzgo, hoss31

are you using those SSDD to load just OS ?

Cheers
Sergio

I use the 120g vertex for win7, games, and daily use. The 640WD I use for vista, misc. storage and the 32g warp for xp and benching.

[gugle]

my UD3P is making a noise, it seems that comes from the CPU VRM, when the BIOS and in FULL
is normal?

[Hoss331]

If its a buzz noise its normal.

[chuck4456]

I still haven't had a chance to sit down and overclock mine.

[nugzo]

very nice mate are those the normal Gskill's SSD ?

Cheers
Sergio

Gskill Titan. been so many new SSD's out since i got these, i dont know how these stack up to the new ones.

Installing Trident 9600's now.

[nugzo]

Installing Trident 9600's now.

They wouldnt boot into windows at 1200 1.8 but will at 1.9v. Everest scores identical to the pi's. Now lets see if they'll go any higher

[Homeless2]

Is there any way to reduce the amount of mch voltage needed? I need 1.36 to get 475, but to get to 500fsb I need 1.46

[nugzo]

Anybody have anything you want me to try with the Tridents? So far tried 400/2.66d=1333, 200/2.66c=1333, 2.66/2.50a=1250 all were no post. Auto settings.2.0v That was at 500fsb. I'll try droppin the multi and raisin the fsb some now. i'll also try to drop pl to 7 for the 333/2.40b=1200.

[Hoss331]

Ok, now thats 2 sets of tridents that wont boot 1200 at 1.8, maybe there not the same ics as the blades.

[18 is # 1]

Anybody have anything you want me to try with the Tridents? So far tried 400/2.66d=1333, 200/2.66c=1333, 2.66/2.50a=1250 all were no post. Auto settings.2.0v That was at 500fsb. I'll try droppin the multi and raisin the fsb some now. i'll also try to drop pl to 7 for the 333/2.40b=1200.

I thought the 2.66 strap was bugged (at least on mine and others). Try 333 or 400.

[Hoss331]

266/2.50 works fine on my board

[xzulu]

Anybody have anything you want me to try with the Tridents? So far tried 400/2.66d=1333, 200/2.66c=1333, 2.66/2.50a=1250 all were no post. Auto settings.2.0v That was at 500fsb. I'll try droppin the multi and raisin the fsb some now. i'll also try to drop pl to 7 for the 333/2.40b=1200.

Damn....

@nugzo

How hot are they at 2.0v?

[nugzo]

Dead. I put the pi 9600's in with them at 1000 1.9v, Pi's were tested stable at the lower voltage. No post with all 4 Dimms.. Now wont post with just tridents. Pi's still post fine. Maybe the 2.0 got em? I have an antec spot cool on them. Dunno. I wasnt that impressed b4 they died. Gonna get some more Pi's...

[Jor3lBR]

Dead. I put the pi 9600's in with them at 1000 1.9v, Pi's were tested stable at the lower voltage. No post with all 4 Dimms.. Now wont post with just tridents. Pi's still post fine. Maybe the 2.0 got em? I have an antec spot cool on them. Dunno. I wasnt that impressed b4 they died. Gonna get some more Pi's...

Yeah these LV are VERY sensible to volts specially when the Gigabyte board is known to overvolt mem's, I would say that 1.9v on BIOS is more like 2.0v on real world.

Stick with the 9600 PI's that can take 2.5v without breaking a sweet.

[Hoss331]

I finally got my other ssd for the xp install and so far its showing some nice gains in spi. The timings on the xp runs were a little tighter but were only about 1 sec better than the win7 timings. Later in the week I should be able to get some improved 5ghz 1m runs done.

4.59 1275




4.5 1250

[xzulu]

Dead. I put the pi 9600's in with them at 1000 1.9v, Pi's were tested stable at the lower voltage. No post with all 4 Dimms.. Now wont post with just tridents. Pi's still post fine. Maybe the 2.0 got em? I have an antec spot cool on them. Dunno. I wasnt that impressed b4 they died. Gonna get some more Pi's...

OUCH! Damn, looks like those LV tridents are...just like what Jor3lBR said. Sensitive.

Yeah, the 9600 PI's look like they're still the best. Just like what Sergio said, no matter how much voltage you give it it, it could take it.

[bluestang]

Dead. I put the pi 9600's in with them at 1000 1.9v, Pi's were tested stable at the lower voltage. No post with all 4 Dimms.. Now wont post with just tridents. Pi's still post fine. Maybe the 2.0 got em? I have an antec spot cool on them. Dunno. I wasnt that impressed b4 they died. Gonna get some more Pi's...

nugzo, That just sucks Good luck with the Pi's. Hope it works with another set for ya.

[18 is # 1]

I'm trying CPU Term everywhere from 1.3-1.4v wiith CPU ref ~63% and MCH ref ~60% (at Ghostleader's recommendation), MCH 1.36-1.5v

I've gotten stable (Orthos for a hour) once at 505 FSB 4.05 GHz and 1212 MHz.

I have yet to get the RAM past 1240 without failing Memtest, Linpack, etc...

Any ideas?

CPU =intel E4000 E0 
Motherboard = GAEP45-UD3P
BIOS Version =  6
Ram = Pi 9600
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio .............................: 
Fine CPU Clock Ratio.....................:
CPU Frequency ..............................:4040


Clock Chip Control 
Standard Clock Control
CPU Host Clock Control..................: 
CPU Host Frequency (Mhz) ............:277
PCI Express Frequency (Mhz) .........:1008


DRAM Performance Control
Performance Enhance...................: Turbo
Extreme Memory Profile (X.M.P.).....: Dis
(G)MCH Frequency Latch...............:333
System Memory Multiplier ..............:  
Memory Frequency (Mhz) ..............:1212
DRAM Timing Selectable ................: 

Standard Timing Control
CAS Latency Time........................:5
tRCD .............................................:5
tRP.................................................:5
tRAS..............................................:15


Advanced Timing Control
tRRD...........................................:A
tWTR..........................................:A
tWR............................................:A
tRFC...........................................:55
tRTP...........................................:A
Command Rate (CMD) ....................:0


Channel A
Static tRead Value.........................:9
Channel B
Static tRead Value.........................: 9


Motherboard Voltage Control
CPU
CPU Vcore….………................................:1.38
CPU Termination…..... 1.200V*...............:1.36
CPU PLL…………………....1.500V*.......:A 
CPU Referen.…………....0.755V*...........:.76

MCH/ICH
MCH Core…………….....1.100V...........:1.44
MCH Reference….…….0.800V............:.72
MCH/DRAM Ref.…......0.900V..............:N
ICH I/O……………….....1.500V............:N
ICH Core…………...……1.100V...........:N

DRAM
DRAM Voltage ……....1.800V............:2.100
DRAM Termination .…0.900V............:N
Channel A Reference 0.900V............:N
Channel B Reference 0.900V............:N

[Zucker2k]

I fled to Core i7, but I'm back, missed the UD3P and my Q9650

Some quick testing with this chip I picked up at the MC for $169.99 + tax.

EP45C-UD3R (wanted the option to upgrade to DDR3 - soon)
Q9550 L844B782
Xigmatek SDT 1283
Windows 7 x64 on 2x 74GB Raptor Raid0



More later.

[tool_462]

Lookin good Zucker

Your old UD3P and Pi Black are still in a good home in a nice cozy wood case

Toasted chip and 1 corrupted BIOS later, still rollin on.

[Zucker2k]

Lookin good Zucker

Your old UD3P and Pi Black are still in a good home in a nice cozy wood case

Toasted chip and 1 corrupted BIOS later, still rollin on.

Too bad about the chip, it was a good chip. I received the pm and I'll try to see if I have any template saved that might be of help.

[bluestang]

This is so much fun. There's no way this is prime stable (haven't tried yet), but I can get into XP and manage this with the 4.00B multiplier.

[Triton]

wohoo !

Ofcourse there is a limit in the cheapest DDR2-800 Mem u can buy ! They were never bought to this build, but seemed OK for 4GHz+ with earlier 750i build...anyways:

4150MHz was 8hr+ P95 OK, but later gave error at 5 and 3hr mark...anything above it was a no go, resulting in meaningless tweaking. Had 2x 10hr P95 Blend runs at 4.1GHz (mem 912MHz), and last I could lower vcore to 1.3375v, FSB 1.28(65%ref), NB 1.28v(auto ref) - lower NB and FSB tip by LSDMEASAP

so...I AM happy with 4.1GHz...1.296v load is also helping .....mem is maxxed out...but, should I go DDR-9200/9600? there are OCZ Blades and GSKILL @ 1,8v...I could perhaps get 4.25Ghz with 1.368v bios...but that would be 2.4x mem ratio

Happy or super happy? cost is 100 euros...but G.SKILL are not sold in my country, OCZ Blades arrive in september....

EDIT/// Re evaluate your music! Found Eddie Hazel from '71, rocks Hendrix soxx off -Maggot Brain....all brit gtr players sound this, so does Buckethead in particular. Like it, alooooot

10hr P95 Blend, 4.1Ghz 1.296v load. havent tested lower vcore.

[Triton]

[QUOTE=18 is # 1;3959665]I'm trying CPU Term everywhere from 1.3-1.4v wiith CPU ref ~63% and MCH ref ~60% (at Ghostleader's recommendation), MCH 1.36-1.5v

the dual cores i've seen here have had very low MCH volts. dunno about d.c. refs, but they are 75% of your stable oc. i bet you'll be running 100mhz higher soon