Quote Originally Posted by blaxtr3m3 View Post
Congratulations m8

I just couldn't get my system to boot past 222 Bclk
Tried everything even the exact same bios template you posted earlier but no luck
There is just something missing I can't figure out. any thing over 4000MHz on the qpi and no post !!!
Thanks blaxtr3m3.

I don’t know what the difference is between the two systems or settings for that matter. I found today that this setup really likes the pci @113 the best.

I don’t claim to have the answers to why your system doesn’t want to clock above 222Bclk but I’m willing to post any of the setting I used while testing my system. Of course as we all know, system may react differently even though the setting and components may be quite similar.

These are only suggestions and I bet you have tried all of the following in hopes of clearing the 222 Bclk wall but just in case. Have you tried relaxing the DDR3 timings and testing at a lower speed or tested with any other DDR3? Have you tried bypassing 222 Bclk and starting at a higher Bclk say 223-230 with the CPU voltage below 1.55v? This D0 doesn’t like the voltage above 1.55v until it’s running above 230 Bclk.