-
I find HyperPi 32M to be the most "picky" on RAM/IMC too.
I have been trying today (based on my @4GHZ(19x211) 1.15v, 11 & 8 hours Primestable setup), and event tho I have had many successful Superpi 32M and Prime-smallFFT runs up to BCLK220, but Hyperpi 32 will eventually fail over BCLK212, no matter what i could do so far.
At BCLK212 it will run about 8-10 passes, and then 1 core drops out. At > BCLK213, the core drops out after 1-2 passes. Raising the VVT or loosing the RAM-timings didn't help . Even tho this setup has passed several hours Prime smaFFT at 4.1GHZ(216x19) 1.168v, but BCLK212 seams to be the BCLK-wall for RAM/IMC-stability at x19 multi on my setup.
I have been experimenting with QPI:Uncore 1:1 at x18 lately, and it was good to see it passing Hyperpi 32M.
@4GHZ (211x19) 1.15v , Hyperpi 32M:
► ASUS P8P67 Deluxe (BIOS 1305)
► 2600K @4.5GHz 1.27v , 1 hour Prime
► Silver Arrow , push/pull
► 2x2GB Crucial 1066MHz CL7 ECC @1600MHz CL9 1.51v
► GTX560 GB OC @910/2400 0.987v
► Crucial C300 v006 64GB OS-disk + F3 1TB + 400MB RAMDisk
► CM Storm Scout + Corsair HX 1000W
+
► EVGA SR-2 , A50
► 2 x Xeon X5650 @3.86GHz(203x19) 1.20v
► Megahalem + Silver Arrow , push/pull
► 3x2GB Corsair XMS3 1600 CL7 + 3x4GB G.SKILL Trident 1600 CL7 = 18GB @1624 7-8-7-20 1.65v
► XFX GTX 295 @650/1200/1402
► Crucial C300 v006 64GB OS-disk + F3 1TB + 2GB RAMDisk
► SilverStone Fortress FT01 + Corsair AX 1200W
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks