"ASUS P5Q Deluxe discussion".

[scharnhorst]

Hello guys,

I'm trying to overclock my Q9650 :

Asus P5Q deluxe bios 1306
Q9650 (9*467MHz ) + Ifx14-10 with scythe Slisptream 1200rpm
2*2Gb Gi-Skill Pi Black 8500
POV 8800 GTS640
PSU : Corsair HX520
stable under OCCT and LinX

I would like to have your help. Do you see values that I should avoid (too high to get something safe) or improvements that should be done?

AI Overclock tuner: Manual

CPU Ratio Setting: x9,0
FSB Frequency: 467MHz
PCI-E Frequency: 100MHz
FSB Strap to North Bridge: 333
DRAM Frequency: 935MHz
DRAM CLK Skew on Channel : AUTO
DRAM Timing Control: Manual

1st Information:

CAS# Latency: 5
DRAM RAS# to CAS# Delay: 5
DRAM RAS# Precharge: 5
DRAM RAS# Activate to Precharge: 12
RAS# to RAS# Delay : AUTO
Row Refresh Cycle Time: 45
Write Recovery Time: AUTO
Read to Precharge Time: AUTO
DRAM Static Read Control : DISABLED
DRAM Read Training: DISABLED
MEM. OC Charger: DISABLED
AI Clock Twister: MODERATE
AI Transaction Booster: MANUAL
Common Performance Level: 10
All Pull-Ins: ENABLED

CPU Voltage : 1,30000
CPU GTL Voltage Reference (0/2) : AUTO
CPU GTL Voltage Reference (1/3) : AUTO
CPU PLL Voltage : 1,50
FSB Termination Voltage : 1,28
DRAM Voltage : 1.80
NBridge Voltage : 1.26
NBridge GTL Reference : AUTO
SBridge Voltage : 1,10
PCIE SATA Voltage : 1,50

Load Line Calibration : ENABLED
CPU Spread Spectrum : DISABLED
PCIE Spread Spectrum : DISABLED
CPU Clock Skew : NORMAL
NBridge Clock Skew : NORMAL


Any help would be appreciate.
Thank you in advance.