Quote Originally Posted by Leeghoofd View Post
Have you tested each stick seperately ? could be one dimm is not 100%; Also 1.4Nb voltage for just 400FSB is way too much, these P45 chipsets are very itchy temp wise...drop down to 1.26-1.3.

Also since you are having ram issues why boost performance level ?

Plus why don't you leave all GTL values at auto ?, I hardly think CPU tweaking is involved for just a mere 3.2Ghz, same for FSB term and CPU PLL... you are just pumping volts.

AUTO really does magic on these boards...
i tested a pair of ram in every a pair of dimm. it works so good. :d

ram is new...:d

i always keep vNB is 1.3v. i try to increase vNB to 1.4v to keep stable but unsuccessful...

perfornmance level is 8, works good for a pair of ram but 2 pair of ram is not. although, i leaves it auto. it also dont work good for 2 pairs of ram...

i tested with cpu. it is so good with this volt.

the problem only is ram (4 dimms).