Quote Originally Posted by Brad8988 View Post
K need alittle advice here. Im trying to get stable at 4.2Ghz but LinX BSOD after 4 mins which makes me think its not a Vcore problem It will do 4Ghz @ 1.16v load but at the moment trying to get 4.2Ghz @ 1.23v load.

Heres my settings. Im totally lost when it comes down to all the other voltages. This is where i could do with the advice.


4.2Ghz 920 D0 BSOD after 4 mins of LinX.

CPU Clock Ratio [20x]

Advanced CPU Features [Press Enter]:
CPU Clock Ratio [20x]
Intel(R) Turbo Boost Tech [Enabled]
CPU Cores Enabled [All]
CPU Multi Threading [Enabled]
CPU Enhanced Halt (C1E) [Enabled]
C3/C6/C7 State Support [Disabled]
CPU Thermal Monitor [Enabled]
CPU EIST Function [Enabled]
Virtualization Technology [Disabled]
Bi-Directional PROCHOT [Disabled]

Uncore & QPI Features [Press Enter]:
QPI Link Speed [x36]
Uncore Frequency [x16]
Isonchronous Frequency [Enabled]

Advanced Clock Control [Press Enter]:
standard clock control
Base Clock (BCLK) Control [Enabled]
BCLK Frequency (MHz) [200]
PCI Express Frequency (MHz) [AUTO]
C.I.A.2 [Disabled]

advanced clock control
CPU Clock Drive [ 700mV]
PCI Express Clock Drive [ 700mV]
CPU Clock Skew [ 0ps]
IOH Clock Skew [ 0ps]

Performance Enhance [Turbo]
Extreme Memory Profile (X.M.P.) [Disabled]
System Memory Multiplier (SPD) [x8]
DRAM Timing Selectable (sPD) [Manual]

Channel A

CAS Latency Time 8 [9]
tRCD 8 [9]
tRP 8 [9]
tRAS 20 [24]

Channel B

CAS Latency Time 8 [9]
tRCD 8 [9]
tRP 8 [9]
tRAS 20 [24]

Channel C

CAS Latency Time 8 [9]
tRCD 8 [9]
tRP 8 [9]
tRAS 20 [24]

Advanced DRAM Features [Press Enter]:
Performance Enhance [Turbo]
Extreme Memory Profile (X.M.P) [Disabled]
System Memory Multiplier (SPD) [AUTO]
DRAM Timing Selectable (sPD) [Manual]


Advanced Voltage Control [Press Enter]:
Load Line Calibration [Enabled] (Whats peoples views on this?)
CPU Vcore 1.15v [1.28125v]
QPI/VTT Voltage 1.150v [1.280v] (Tried from 1.28v-1.36v with no change in how long it takes to BSOD)
CPU PLL 1.800v [AUTO]

MCH

PCIE 1.500v [AUTO]
QPI PLL 1.100v [AUTO]
IOH Core 1.100v [AUTO]
ICH I/O 1.500v [AUTO]
ICH Core 1.1v [AUTO]

DRAM

DRAM Voltage 1.500v [1.66v]
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]
Exactly same here, I can do 4GHz stable 191x21 and it can do 50 LinX passes maxed but when I tried 200x21, it would BSOD in like 3 minutes, I tried to bump all voltages but I still get BSOD after 3 ~ 4 minutes. What do you guys think?