X48 Rampage Formula Preview.

[buBleZ]

Do you guys are also experiencing long booting problems?

After it detects my raid, it get stuck with blinking cursor in left top corner for ~5 seconds if I'm botting from raid and for ~15-20 if I'm botting from cd - any clues how to decrease this delay?

BTW: When I'm testing my ram using 5th test of memtest I noticed that there are 2 passes in this test, first goes normal but second goes very fast. And if I'm going to get any errors I will get it in that fast pass. Anyone know what does that means and why I'm only getting errors in this pass?

This booting problem is only if RAID is enabled and in SATA mode its normal. Disabling CDROM as the first boot device helps a bit. I am suspecting if this has started from installing the latest bios

Hi there


With the QX i have a strange problem which I found that I am not the only one who gets this with a asus x48/x38 board and a QX with a used cpu multiplier other than 9
System boot up from cold (cut off from the voltage with a socket switch) i get a message after POST that the VID setting or something like that is invalid ad I´ve to enter bios.
Done that, cachanged nothing, exit bios, system boots, perfectly stable.
I can restart as often as I want, it will allways boot up normally, except i take the system completly off Power with the socket switch or the switch on the PSU.

Even I have the same issue.. Couldnt find a convincing reason