Quote Originally Posted by SoulsCollective View Post
For BIOS settings -
CPU Features
- all disabled except
- Execute Disable Bit - Enabled
- Virtualisation - Enabled

DRAM
- all Auto
- lowgap 1536M

Voltage
- all stock except
- vCore 1.4 (tried both setting and with using VID special Add)
- vTT 1.4

All other Genie settings stock except
QPI - 4.8
DRAM - x06
Uncore - x12
BCLCK - 185

This boots fine. For same BIOS settings but BCLCK 190, will not boot - locks up showing CF code on hot reboot, occasionally gets to 26 on cold boot (with power unplugged), but then reboots and locks again at CF.

Edit: If it's relevant, I once saw 79 displayed - but the board immediately rebooted and I haven't seen it again.
tried setting QPI freq to auto instead of 4.8ghz ?