no problem mate keep in mind that its just stable on SPI32 and CRYSIS 64 and all other games, as its a low vid 1,1875 can't ibt it...im just playing till 4700 (will be my next)

sorry this is my first time i fill a template


Code:
******Gigabyte EP45 UD3P******

Robust Graphics Booster.........................[  Turbo  ] 
CPU Clock Ratio.................................[  9x   ] 
Fine CPU Clock Ratio............................[   ] 
CPU Frequency 4.60Hz...........................[512x9]

******Clock Chip Control******

CPU Host Clock Control..........................[ enabled  ] 
CPU Host Frequency (Mhz)........................[  512  ] 
PCI Express Frequency (Mhz).....................[  102  ] 
C.I.A 2 [Disabled] 

******Advanced Clock Control******

CPU Clock Drive.................................[ 900mv  ] 
PCI Express Clock Drive.......................[ 900mv  ] 
CPU Clock Skew.................................[ 0ps    ] 
MCH Clock Skew................................[ 50ps  ] 

******DRAM Performance Control******

Performance Enhance [Turbo] 
Extreme Memory Profile (XMP)..................[profile1] 
(G) MCH Frequency Latch........................[333mhz ]
System Memory Multipler.........................[2.40B ] 
Memory Frequency 1066.........................[1229] 
DRAM Timing Selectable..........................[manual] 

CAS Latency Time..........................[ 5 ] 
tRCD............................................[ 5 ] 
tRP..............................................[ 5 ] 
tRAS............................................[ 15 ] 

******Advanced Timing Control******

tRRD............................................[ 3  ] 
tWTR...........................................[ 3  ] 
tWR.............................................[ 4  ] 
tRFC............................................[ 50 ] 
tRTP............................................[ 3  ] 
Command Rate (cmd)..............................[ auto ] 

******Channel A and B Timing Settings******     

Static tRead Value           [ 0 ] ................[ 8 ] 
tRD Phase0 Adjustment     [ 0 ] ................[ auto ]
tRD Phase1 Adjustment     [ 0 ] ................[ auto ]
tRD Phase2 Adjustment     [ 0 ] ................[ auto ]
tRD Phase3 Adjustment     [ 0 ] ................[ auto ] 

tRD 2rd (Differnt Rank)    [ 0 ] ..................[ 9 ]
tWR 2wr (Differnt Rank)   [ 0 ] .................[ 7 ] 
tWR 2rd (Differnt Rank)    [ 0 ] .................[ 8 ] 
tRD 2wr (Same/Difft Rank) [ 0 ] ................[ 8 ] 

Dimm 1 Clock Skew Control.......................[auto] 
Dimm 2 Clock Skew Control.......................[auto] 
DDR Write Training..................................[auto ] 

******Channel A and B Driving Settings****** 

Drive Strength Profile.........................[auto] 
Data Driving Pull Up Level....................[auto] 
cmd Driving Pull Up Level.....................[auto] 
ctrl Driving Pull Up Level......................[auto]
clk Driving Pull Up Level.......................[auto]

Data Driving Pull Down Level..................[auto] 
cmd Driving Pull Down Level...................[auto] 
ctrl Driving Pull Down Level....................[auto] 
clk Driving Pull Down Level.....................[auto]

******Motherboard Voltage Control******

Load-Line Calibration [Enabled] 
CPU Vcore         [ 1.18750 ]...................[1,43750v ] 
CPU Termination   [ 1.20    ]...................[1,38 ]
CPU PLL           [ 1.50    ]...................   [1,57 ]
CPU Reference     [ 0.760   ]..................[0,899 ]

MCH Core          [1.100    ]...................[1,46 ]  
MCH Reference     [0.760    ].................[0,914] 
MCH/DRAM Refernce [0.900    ]..............[auto] 
ICH I/O           [1.500    ]...................[1,500 ] 
ICH Core          [1.100    ]..................[1,200 ] 

DRAM Voltage      [1.800    ]..................[2,22 ] 
DRAM Termination  [0.900    ].................[auto ] 
Channel A Ref     [0.900    ]...................[auto ] 
Channel B Ref     [0.900    ]...................[auto ]  

******Advanced BIOS Features******

ALL DISABLED...

Limit CPUID Max to 3............................[ ] 
No-Execute memory Protect..................[ ]  
CPU Enhance Halt (CIE)........................[ ]  
C2/C2E State Support..........................[ ]  
C4/C4E State Support..........................[ ] 
CPU Thermal Monitor............................[ ] 
CPU EIST Function..............................[ ] 
Virtualization Technology......................[ ]
cheers
Sergio