** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[motopen1s]

After my last post I've done several things trying to make things work:

1) Another bios flash (using qflash)
2) Memtest each RAM module (as it turned out - one did gave errors, so I am running 2gb in the system currently)
3) New Vista x64 SP2 install, chipset & video drivers etc.
4) Reseated the card several times, tried the top pci slot.

Result: stability = yes, Auzentech Prelude = no go.

The card is detected as a 'new hardware detected' pops out when windows starts, however when I try to install the drivers on load the following message comes:

"Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this Setup program.
Setup will exit."

The Prelude is plugged in second (lower) pci slot. The green lamp on the side of the card is on.


Other bios settings:
- integrated audio disabled

Any thoughts/ideas?