yeah nickel plateled acyrlic only and the connector that connects the mosfet + nb/sb blocks sell them in different colors seperatly and the stock should be just acyrlic
yeah nickel plateled acyrlic only and the connector that connects the mosfet + nb/sb blocks sell them in different colors seperatly and the stock should be just acyrlic
Personally, I feel less is more. Traditional EK logo, no flashy colors or LEDs, derlin and nickel plated! ... either way though Eddy you've developed yet again another magnificent product. My only complaint is I can't buy it right now!
Agenda: I have 0 projects prioritized for the year, 0 in progress this month, 0 this week, and 0 as of this moment.
Current primary function: traveling.
The one with partial Red akrilik top n then combined black nickle plated finish base will be nice pls is more stain proof, n then combined with led like the one came with the mb
estimated price?
ETA?
Last edited by Boyu; 05-24-2009 at 07:17 AM.
Let me know what you think about this design as for me plain surface looks a little boring to me
Originally Posted by creidiki
EKs are like waterblock pr0n
omg pr0n
Wow, this is getting better and better. The new one is the best looking design yet, IMO.
XSPX RX360 - Nanofluid - Laing DDC/MCP355 Tops - 120 vs. 140 radiator - Temps in relation to Flowrates - EK Supreme orientation on i7 - Stacked Radiators - Triple-Radiator roundup - Waterblocks on i7 - Triple DDR3 Roundup - OCZ Hydroflow i7 mod - EVGA Classified MB blocks - Huge Radiators - Rampage II Extreme MB blocks - Flowmeters
Eddy,
That simple look is my favorite so far. Clean look for sure, with enough custom touch to show quality. Again my opinion.
eddy, why not have a poll with the designs you have come up with? and let all the XS-ers vote?
Eddy wouldn't it be very cool to put EVGA on the plexi part, but in the EVGA font as well?
Like this
Hmm... hope EVGA isn't going to make trouble over that idea
lol... This forum requires that you wait 70 seconds between posts. Please try again in 8 seconds.
*phone rings*
Friend: Do you have a spare PSU lying around?
Me: No why?
Friend: My PSU just blew up, I think the second 8800GTX might have been too much for it to handle
Me: what PSU was that again?
Friend: Antec 480w
Me:........
What about the thickness of the whole thing? I can imagine that it might look a bit more elegant if it had less thickness. Just a few mm off the copper, for example. Might also cut expenses a little.
I don't know about minimum required thickness for stability etc. but if it can be done, it might look good.
XSPX RX360 - Nanofluid - Laing DDC/MCP355 Tops - 120 vs. 140 radiator - Temps in relation to Flowrates - EK Supreme orientation on i7 - Stacked Radiators - Triple-Radiator roundup - Waterblocks on i7 - Triple DDR3 Roundup - OCZ Hydroflow i7 mod - EVGA Classified MB blocks - Huge Radiators - Rampage II Extreme MB blocks - Flowmeters
Awesome block. I think I will keep my air cooling atm and skip the BP/Koolance blocks until this block is released. I dread short, generally useless and aesthetically unpleasant looking loops.
My HeatWare: http://www.heatware.com/eval.php?id=70151
man that looks great
can you do a render in acrylic top instead of delrin?
What a great way to design a product, get the concept then work with the end users to refine it... Hats off to you eddy
Last edited by b@llz0r; 05-24-2009 at 09:24 AM.
Looks great Eddy. I'm not a huge fan of the X58 on the link piece but I do like the red.
When can I buy a few?
Is there no chance for a clear top version for the full board with the red in the middle. Just I have clear tops for my GTX295 and EK Supreme. Thanks Eddy, Looking great. I like the X58 better than the other text.
just a question for you waterblock manufacturers...
increasing the surface area of the derlin part, of course, more manufacturing time due to more machining process, but adding ridges on the top, would it not help a bit by increase heat transfer by air as well as water?
and the font for the "x58" is a bit too plain...
"The ultimate measure of a man is not where he stands in moments of comfort and convenience, but where he stands in times challenge and controversy."
Dr. Martin Luther King Jr.
DIY: Self Clinching Nuts
Canon EOS 7D | Tokina 12-24mm f/4 | Canon EF 24-105 f/4 L | Canon EF 70-200 f/2.8 L IS Mk II | Canon EF 35mm f/1.4 L | Canon EF 400mm f/5.6 L | Canon EF 100-400mm f/4-5.6 L
RIOT!!!
NICKLE!!!
RAWR!!!
/riot
Great looking block Eddy
Delrin doesn't transfer heat very well, I doubt adding ridges would do anything in helping heat transfer by air
[ 3770K @ 4.2 : H100i : ASRock Z77E-ITX : GTX560 Ti : 16GB DDR3 1800 : +4TB : Bitfenix Prodigy : 2x Dell S2340M : Filco Majestouch-2 [Cherry Brown] : BX8a Deluxe]
Eddy, that last design will make me buy a Classified board just to have that block on it!!! Good work!
You could possibly run into legal issues putting the evga logo on something that isn't made by evga.Eddy wouldn't it be very cool to put EVGA on the plexi part, but in the EVGA font as well?
Like this
Hmm... hope EVGA isn't going to make trouble over that idea
EVGA is also currently testing a classified block as well, so as above maybe legal issues.
really... knowing EVGA it won't be cheap... look at their hydrocopper blocks...
lol... This forum requires that you wait 70 seconds between posts. Please try again in 8 seconds.
*phone rings*
Friend: Do you have a spare PSU lying around?
Me: No why?
Friend: My PSU just blew up, I think the second 8800GTX might have been too much for it to handle
Me: what PSU was that again?
Friend: Antec 480w
Me:....
Eddy take a look:
Also red plexi with half of thickness will be awsome!
If you can use that design im first on your list
Last edited by hausner; 05-24-2009 at 11:14 AM.
|::| i7 920 3849A914
|::|EVGA Classified 760
|::|G.Skill Trident 6GB DDR3-2000
|::|BFG GTX 275
|::|G.Skill Falcon 2 128GB
|::|WD BLACK 1TBx2
|::|Ultra X3 1000W
|::|Powered by Heatkiller LT/Ek-Classified/EK 275GTX /Feser x360/MCP355x2
|::|LCD: Samsung T260
"Sharing your knowledge is always the best way to learn new things". OPB
^
That looks great, and since its not using EVGAs brand name you might avoid legal trouble.
[OT]Eddy will you be making an R2E block like this one?[/OT]
ASUS Rampage II Ex 1504
Intel i7 920 D0 3850A795
Sapphire HD5970 EK FC 1Ghz/1150Mhz 1.237v
OS Intel X25-M RAID0
Data 500GB Seagate Barracuda 7200/32Mb
OCZ Reaper 6GB/1800/C8
BeQuiet Dark Power Pro 1200w
1X 18w DDC3.2 w/XSPC Res Top
1X 18w DDC3.25 w/XSPC Res Top
1X XSPC Submersible Pump/Res w/RS120mm
HW Labs GTX480 4x120mm
TFC Monsta 6x140mm
EK Supreme LT 3/8" Feser Tubing
EK IOH/SB and Mosfet Blocks
Lian Li V2110 w/EX-34
26" Iiyama Prolite
I think the above would look really good without the EK logo, but from where eddy is sitting he wants it on there somewhere
I agree but also classified's logo.Eddy wouldn't it be very cool to put EVGA on the plexi part, but in the EVGA font as well?
Like this
Hmm... hope EVGA isn't going to make trouble over that idea
WAITING FOR SOMETHING... FULL LIQUID BY YBRIS Ybris A.C.S. FULL CHROME Limited Edition N°058 | Ybris A.C.S.-G FULL CHROME Limited Edition N°058 | SANSO PDH-054 12V A.F. | Feser Xchanger Q.R. 480 with Feser Xtender blue\Scythe Ultra Kaze 3000rpm | Tecnofront Bay Trap | Tygon R-3606 3\8" 1\2"
Posting Permissions
Reply With Quote
Bookmarks