Rancho Cucamonga, Ca....do you live in So Cal ?Originally Posted by jcniest5
Rancho Cucamonga, Ca....do you live in So Cal ?
You ran stability on 4200Mhz, but ran 3dMark on 4000Mhz Why ?Got my Classified and W3520 Batch 3848A352 together late last night, I also install the heatkiller 3 block. So far so good, now to go higher...
http://service.futuremark.com/compare?3dm06=10916391
24/7 Asrock P67 Extreme4|2500K @ 4600 @ 1.38v|2x2GB A-data value|XpertVision 8500GT 600/450|WD 6400AAKS|CM 690 + 3 x 140mm + 2 x 120mm|Zalman CPNS-10X Performa|Chieftec 750-14C|Zalman MFC1 Plus
Does that version of 3DMark correctly read the +1 multiplier when using Turbo mode?
He probably ran 3DMark at 4200 MHz but it only reported 4000 MHz because it used a 20X multi instead of the correct 21X.
I'm in Upland and very near Rancho Cucamonga, Ca.
Please give me his contact # so I can buy one myself.
Thanks
CPU: i7 Core OC @ 4.2Ghz D0 HT ON
Motherboard: Asus P6T Deluxe
RAM: 6 Gb Corsair Dominator 1600mhz 8-8-8-24 1T
Video card: EVGA GTX 285 x 2 (SLI)
HD: 4 Velociraptors (300 gb) in Raid 0 w/ Areca 1210
HD: WD 1T Storage
PSU: Corsair HX1000W
Is this seller PAo_ReVolt from Ebay?
CPU: i7 Core OC @ 4.2Ghz D0 HT ON
Motherboard: Asus P6T Deluxe
RAM: 6 Gb Corsair Dominator 1600mhz 8-8-8-24 1T
Video card: EVGA GTX 285 x 2 (SLI)
HD: 4 Velociraptors (300 gb) in Raid 0 w/ Areca 1210
HD: WD 1T Storage
PSU: Corsair HX1000W
Don't count on Futuremark displaying the proper speed as it is usually wrong.You ran stability on 4200Mhz, but ran 3dMark on 4000Mhz Why ?
I pulled the trigger and ordered one on Ebay (from this Pao guy). Batch as stated is: 3849B209. I wonder if he has any lower B batch number than what he stated on his auction.
Asus Rampage II Gene, Xeon W3550 D0 Mushkin PC3-2000 6GB, BFG 9600GT OC 512MB DDR3
Asus A8N32-SLI Deluxe 1.01G, AMD A64 4000+, 2x1GB Ultra PC-3200, EVGA 7600GT 256MB DDR3
Asus MA378-T with AMD Athlon 64 X2 7850
ECS 945GCT-M/1333 v3.0, Intel Celeron E1400, MSI 8500GT 256MB DDR3
BIOStar P4M900-M7 Rev. 7.0, Intel Celeron 440, 1GB Kingston, 6600LE
Gigabyte M61PME-S2P with AMD Athlon 64 LE-1660, EVGA 8500GT 1GB DDR2
A so-so Xeon W3520 chip can be seen here. >> xeon W3520
Nice chip RR.Got my Classified and W3520 Batch 3848A352 together late last night, I also install the heatkiller 3 block. So far so good, now to go higher...
http://service.futuremark.com/compare?3dm06=10916391
That's him...I just ordered one.
Asus Rampage II Gene, Xeon W3550 D0 Mushkin PC3-2000 6GB, BFG 9600GT OC 512MB DDR3
Asus A8N32-SLI Deluxe 1.01G, AMD A64 4000+, 2x1GB Ultra PC-3200, EVGA 7600GT 256MB DDR3
Asus MA378-T with AMD Athlon 64 X2 7850
ECS 945GCT-M/1333 v3.0, Intel Celeron E1400, MSI 8500GT 256MB DDR3
BIOStar P4M900-M7 Rev. 7.0, Intel Celeron 440, 1GB Kingston, 6600LE
Gigabyte M61PME-S2P with AMD Athlon 64 LE-1660, EVGA 8500GT 1GB DDR2
A few days late on this, but there cannot be a XX74 chip. Here's the batch code list for those who care.
Example: L149A463-0726
1st letter or digit = plant code (Malay)
0 = San Jose, Costa Rica
1 = Cavite, Philippines
3 = .............., Costa Rica
6 = Chandler, Arizona
7 = .........., Philippines
8 = Leixlip, Ireland
9 = Penang, Malaysia
L = ............, Malaysia
Q = ..........., Malaysia
R = Manila, Philippines
Y = Leixlip, Ireland
2nd digit = Year of production (2001)
3rd & 4th digits = week (49th week )
5th - 8th digits= lot number
10th - 13th digits = serialization code
3DM only detects the PLL or BCLK whatever its called of 200 on that run when actually it was 200 x 21. 3DM thinks it is 200 x 20...You ran stability on 4200Mhz, but ran 3dMark on 4000Mhz Why ?
I had win7 on there for 3DMark but kept getting the windows restore after OC fail and reboot. I got tired of that real quick...
Last edited by road-runner; 05-13-2009 at 01:00 PM.
Yes.
same thing is happening to me. I'm at 4300 mhz but is only reading 4100mhz how can I fix this?
Asus RIVE Bios 2003
3930k 4.5 ghz @1.29v
G-SKILLS 32gig ddr-1600 ripjaws Z
Enermax Evo Galaxy 1250W
2x EVGA GTX 480 Superclocked SLI @ 900/1800/2000
X-Fi Fatal1ty Titanium PCI-E
4 x crucial Realssd C300 256 Raid 0
Areca 1880i
Seagate 1TB
CM HAF 932
On water:
HK 3.0
2x MCP655
FESER X360
Blackice GTX 480
DD-GTX 480 VGA blocks
DD Reservoir
Windows 7 64bit
Dell 3008WFP 30"
Other than the Xeon have you guys seen anybody prime their 920 D0 at >4.50Ghz with HT on (water or air cooled)?
Last edited by ben805; 05-13-2009 at 04:17 PM.
Core i7 920 D0 3844A717 4.40Ghz HT on @1.36v (LinX/Prime/3D stable), Corsair 850W, 12GB OCZ Platinum 1600, P6T Deluxe V2, EVGA GTX 285 SS, OCZ Vortex SSD 30GB x3 RAID0, HAF 932.
Water Cooling Setup: XSPC RX360, MCP355 + XSPC Res Top, Swiftech GTZ, 1/2" Tygon, Scythe S-Flex SFF21F push, 20mm yateloon D12SL-12C pull.
Opteron 148 CABNE 0528 GPMW 3.1Ghz @1.6v Prime Stable. Westy 37" LVM-37W3, DFI Venus 975, 2GB TeamX Cronus Micron, GSkill HZ, Sapphire X1900XTX, Zippy 700W, X-Fi Xtrememusic, 36GB Raptors x2 @Raid-0.
WC Setup: PA120.3 +Shroud, MCP655, STORM, MCW60, 1/2" Tygon, mini res, Yate Loon.
So did I. According to his listing it says the current batch# is 3849B203. I live in SoCal so it should be here in the next two days if he ships today. I'm curious but thinking about a Xeon 3520 as well.
Well...I just ordered one from the guy in SoCal, I have a classified coming on Mon, so this should work out good.
The thing I love is that I can leave every voltage/ memory, setting on auto, set my 120mm CPU fan to 900 RPM so I can't even hear that the computer's on, and I can loop 3DM06 for hours ...all this at 205x21 4305 Mhz/ 1.180 vcore. I mean if I don't look at the front panel lights, I can't the thing is on it's so quiet.
BTW, I've got a great 4755 Mhz C0 for sale, anyone interested? I'll have it up on Ebay tomorrow.
http://img22.imageshack.us/img22/6751/c0rec.jpg
all you guys getting higher temps with these d0's like mine?
Bobby - no. This Xeon runs a lot cooler than my C0 920.
Intel i9 7900X @ 4.6GHz @ 1.126v
ASUS X299 TUF MARK 1
32GB G.Skill DDR4 2800
2x ZOTAC AMP EXTREME Core GTX1080Ti's in SLi
Loop 1: Apogee GTZ CPU block, MCR360 rad w/ Scythe fans, Micro-res, Aquaextreme 50Z pump
U2-UFO case
Which Board did you use???
I recieved mine from antaresdigital.com so the place is legit, 280 shipped nice deal if anyone still looking for them. Batch is 3849A easily hits 21x222 bclk on UD5, haven't messed with it much beyond that yet as I have a Classified coming tommorow or next day to let the real fun begin!
Yup! Got mine form them today as well. Awesome stuff...they are legit for sure, great find.
I'm Sushiglobster on the Evga forums. I have a 3849A32 D0 at 4.5ghz ...LinX is passing at 1.34vcore on load.
Thing runs hotter than hell, my poor PA120.3 and Heat Killer 3.0 must be screaming.
Load temp is around 73c...earlier today I touched 80c....ambient temps in my room were pretty hot though.
So far, this chip is awesome. Simply the best chip I've ever owned. Now I have to deal with the heat issue.
Heres a 3dmark06 run.
3849a846
http://service.futuremark.com/result...eResultType=14
Speed was 4662 with turbo and HT on. 222*21.
ex58 extreme on water.
1.5 volts those.
My old c0 took 1.5 volts to hit 4.32ghz with HT on turbo on.
So for a 150 dollar upgrade I got 340mhz.
However my 3dmark score jumped up 2 thousand points.
Temps are about 10 degree hotter those on the d0.
So far so good at 4.50Ghz
Last edited by ben805; 05-14-2009 at 05:11 AM.
Core i7 920 D0 3844A717 4.40Ghz HT on @1.36v (LinX/Prime/3D stable), Corsair 850W, 12GB OCZ Platinum 1600, P6T Deluxe V2, EVGA GTX 285 SS, OCZ Vortex SSD 30GB x3 RAID0, HAF 932.
Water Cooling Setup: XSPC RX360, MCP355 + XSPC Res Top, Swiftech GTZ, 1/2" Tygon, Scythe S-Flex SFF21F push, 20mm yateloon D12SL-12C pull.
Opteron 148 CABNE 0528 GPMW 3.1Ghz @1.6v Prime Stable. Westy 37" LVM-37W3, DFI Venus 975, 2GB TeamX Cronus Micron, GSkill HZ, Sapphire X1900XTX, Zippy 700W, X-Fi Xtrememusic, 36GB Raptors x2 @Raid-0.
WC Setup: PA120.3 +Shroud, MCP655, STORM, MCW60, 1/2" Tygon, mini res, Yate Loon.
Posting Permissions
Reply With Quote
Bookmarks