Core i7 920 rev D0 stepping 5 :)

**lee63** · 05-13-2009, 11:06 AM

Originally Posted by jcniest5

Is he local there? Where is he located, actually?

Rancho Cucamonga, Ca....do you live in So Cal ?

**overcrash** · 05-13-2009, 11:34 AM

Originally Posted by road-runner

Got my Classified and W3520 Batch 3848A352 together late last night, I also install the heatkiller 3 block. So far so good, now to go higher...

http://service.futuremark.com/compare?3dm06=10916391

You ran stability on 4200Mhz, but ran 3dMark on 4000Mhz Why ?

**unclewebb** · 05-13-2009, 11:43 AM

Does that version of 3DMark correctly read the +1 multiplier when using Turbo mode?

He probably ran 3DMark at 4200 MHz but it only reported 4000 MHz because it used a 20X multi instead of the correct 21X.

**chuxle** · 05-13-2009, 11:45 AM

Originally Posted by lee63

Rancho Cucamonga, Ca....do you live in So Cal ?

I'm in Upland and very near Rancho Cucamonga, Ca.

Please give me his contact # so I can buy one myself.

Thanks

**chuxle** · 05-13-2009, 11:50 AM

Originally Posted by lee63

Rancho Cucamonga, Ca....do you live in So Cal ?

Is this seller PAo_ReVolt from Ebay?

**drnip** · 05-13-2009, 11:58 AM

Originally Posted by overcrash

You ran stability on 4200Mhz, but ran 3dMark on 4000Mhz Why ?

Don't count on Futuremark displaying the proper speed as it is usually wrong.

**jcniest5** · 05-13-2009, 12:04 PM

I pulled the trigger and ordered one on Ebay (from this Pao guy). Batch as stated is: 3849B209. I wonder if he has any lower B batch number than what he stated on his auction.

**Sparda** · 05-13-2009, 12:05 PM

A so-so Xeon W3520 chip can be seen here. >> xeon W3520

Originally Posted by road-runner

Got my Classified and W3520 Batch 3848A352 together late last night, I also install the heatkiller 3 block. So far so good, now to go higher...

http://service.futuremark.com/compare?3dm06=10916391

Nice chip RR.

**jcniest5** · 05-13-2009, 12:06 PM

Originally Posted by chuxle

Is this seller PAo_ReVolt from Ebay?

That's him...I just ordered one.

**Avan** · 05-13-2009, 12:32 PM

Originally Posted by jcniest5

No offense but I think you must mean "3847A821" as there is no 3874 yet.

A few days late on this, but there cannot be a XX74 chip. Here's the batch code list for those who care.

Example: L149A463-0726

1st letter or digit = plant code (Malay)
0 = San Jose, Costa Rica
1 = Cavite, Philippines
3 = .............., Costa Rica
6 = Chandler, Arizona
7 = .........., Philippines
8 = Leixlip, Ireland
9 = Penang, Malaysia
L = ............, Malaysia
Q = ..........., Malaysia
R = Manila, Philippines
Y = Leixlip, Ireland

2nd digit = Year of production (2001)

3rd & 4th digits = week (49th week )

5th - 8th digits= lot number

10th - 13th digits = serialization code

**road-runner** · 05-13-2009, 12:50 PM

Originally Posted by overcrash

You ran stability on 4200Mhz, but ran 3dMark on 4000Mhz Why ?

3DM only detects the PLL or BCLK whatever its called of 200 on that run when actually it was 200 x 21. 3DM thinks it is 200 x 20...

I had win7 on there for 3DMark but kept getting the windows restore after OC fail and reboot. I got tired of that real quick...

**lee63** · 05-13-2009, 12:54 PM

Originally Posted by chuxle

Is this seller PAo_ReVolt from Ebay?

Yes.

**hlonipha** · 05-13-2009, 03:41 PM

Originally Posted by unclewebb

Does that version of 3DMark correctly read the +1 multiplier when using Turbo mode?

He probably ran 3DMark at 4200 MHz but it only reported 4000 MHz because it used a 20X multi instead of the correct 21X.

same thing is happening to me. I'm at 4300 mhz but is only reading 4100mhz how can I fix this?

**ben805** · 05-13-2009, 04:11 PM

Other than the Xeon have you guys seen anybody prime their 920 D0 at >4.50Ghz with HT on (water or air cooled)?

**ShoNuff** · 05-13-2009, 04:43 PM

Originally Posted by jcniest5

That's him...I just ordered one.

So did I. According to his listing it says the current batch# is 3849B203. I live in SoCal so it should be here in the next two days if he ships today. I'm curious but thinking about a Xeon 3520 as well.

**lee63** · 05-13-2009, 05:10 PM

Well...I just ordered one from the guy in SoCal, I have a classified coming on Mon, so this should work out good.

**roller11** · 05-13-2009, 05:22 PM

Originally Posted by jcniest5

If you can live without the $$$ spent, why don't you just keep both? If not, I would probably keep the lower vcore one. You can always upgrade your cooling for better one later on.

The thing I love is that I can leave every voltage/ memory, setting on auto, set my 120mm CPU fan to 900 RPM so I can't even hear that the computer's on, and I can loop 3DM06 for hours ...all this at 205x21 4305 Mhz/ 1.180 vcore. I mean if I don't look at the front panel lights, I can't the thing is on it's so quiet.
BTW, I've got a great 4755 Mhz C0 for sale, anyone interested? I'll have it up on Ebay tomorrow.

http://img22.imageshack.us/img22/6751/c0rec.jpg

**Splave** · 05-13-2009, 06:53 PM

all you guys getting higher temps with these d0's like mine?

**Renegade5399** · 05-13-2009, 08:13 PM

Bobby - no. This Xeon runs a lot cooler than my C0 920.

**emertX** · 05-13-2009, 10:12 PM

Originally Posted by roller11

The thing I love is that I can leave every voltage/ memory, setting on auto, set my 120mm CPU fan to 900 RPM so I can't even hear that the computer's on, and I can loop 3DM06 for hours ...all this at 205x21 4305 Mhz/ 1.180 vcore. I mean if I don't look at the front panel lights, I can't the thing is on it's so quiet.
BTW, I've got a great 4755 Mhz C0 for sale, anyone interested? I'll have it up on Ebay tomorrow.

http://img22.imageshack.us/img22/6751/c0rec.jpg

Which Board did you use???

**~~bluehaze~~** · 05-13-2009, 10:32 PM

I recieved mine from antaresdigital.com so the place is legit, 280 shipped nice deal if anyone still looking for them. Batch is 3849A easily hits 21x222 bclk on UD5, haven't messed with it much beyond that yet as I have a Classified coming tommorow or next day to let the real fun begin!

**Orangeblast** · 05-13-2009, 11:20 PM

Originally Posted by bluehaze

I recieved mine from antaresdigital.com so the place is legit, 280 shipped nice deal if anyone still looking for them. Batch is 3849A easily hits 21x222 bclk on UD5, haven't messed with it much beyond that yet as I have a Classified coming tommorow or next day to let the real fun begin!

Yup! Got mine form them today as well. Awesome stuff...they are legit for sure, great find.

I'm Sushiglobster on the Evga forums. I have a 3849A32 D0 at 4.5ghz ...LinX is passing at 1.34vcore on load.

Thing runs hotter than hell, my poor PA120.3 and Heat Killer 3.0 must be screaming.

Load temp is around 73c...earlier today I touched 80c....ambient temps in my room were pretty hot though.

So far, this chip is awesome. Simply the best chip I've ever owned. Now I have to deal with the heat issue.

**tajoh111** · 05-14-2009, 12:17 AM

Heres a 3dmark06 run.

3849a846
http://service.futuremark.com/result...eResultType=14

Speed was 4662 with turbo and HT on. 222*21.
ex58 extreme on water.

1.5 volts those.

My old c0 took 1.5 volts to hit 4.32ghz with HT on turbo on.

So for a 150 dollar upgrade I got 340mhz.

However my 3dmark score jumped up 2 thousand points.

Temps are about 10 degree hotter those on the d0.

**diablos** · 05-14-2009, 12:40 AM

**ben805** · 05-14-2009, 05:04 AM

So far so good at 4.50Ghz

Thread: Core i7 920 rev D0 stepping 5 :)

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions