Quote Originally Posted by Fritz_the_germ View Post
Thx for your reply Ghostleader,
I am planing to run 450 MHz fsb@600MHz ram speed and a PL of 6.
That means I should fire up 1.35v to the cpu and 1,51v to the nb.
Water cooling might reduce the electromigration too.
(I hope I translate this right; electromigration means that the electrons hit wholes through the tiny transistors so they wonīt work anymore. Good cooling shloud prevent that {?})
Are you talking about e8500 or q9650? If i remember well i could run 450x9@1199 with very low voltage. nbv arround 1.25 and vcore 1.25 both real volts. Ican try once more and come back with the results.

Now i run 480x9@4320@1200pl7 with the volts you see on the screens. Cpu skew@200, nbskew@100. Its prime95small - blend and memtest stable but i havent tried linx and ibt.


and some benches AFTER i set everything in catalyst settings @ factory defaults settings - except clocks, 800-1000. If you go back to my previous screens youll see that i was about 2000 points worst @ vantage with the same cpu and fsb speed!!!