Gigabyte EX58-UD5/Extreme Discussion Thread

[Sparda]

Sure, just changed the mobo to try if i got any further with it.
Template would be awesome

I dont know how far you already go with it but I´m just right at this clock ; still learning the quirk of the D0. If anyone know a better setting pls post it.
Will try more later this weekend for useable 4.4+GHz HT on and 4.5+GHz HT off.

206x21 - 4.326 Ghz HT on

Advanced CPU Features:
CPU Clock Ratio ................................ [20x]
Intel(R) Turbo Boost Tech ...................... [Enabled]
CPU Cores Enabled .............................. [All]
CPU Multi Threading .............................[Enabled]
CPU Enhanced Halt (C1E) ........................ [DISABLED]
C3/C6/C7 State Support ......................... [DISABLED]
CPU Thermal Monitor ............................ [DISABLED]
CPU EIST Function .............................. [Enabled]
Virtualization Technology ...................... [DISABLED]
Bi-Directional PROCHOT ......................... [DISABLED]

Uncore & QPI Features:
QPI Link Speed .............................. X36
Uncore Frequency ............................(17x) << if stable try x18 or x19
Isonchronous Frequency ......................[Enabled]

Standard Clock Control:
Base Clock (BCLK) Control .......................... [Enabled]
BCLK Frequency (MHz) ................................[206]
PCI Express Frequency (MHz) ........................ [Auto]
C.I.A.2........................................... .. [Disabled]

Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]

Advanced DRAM Features:
Performance Enhance ...................... [TURBO]
Extreme Memory Profile (X.M.P) ........... [Disabled]
System Memory Multiplier (SPD) ........... [8x]
DRAM Timing Selectable (SPD) ............. [QUICK]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................7
tRCD ..................................7
tRP ...................................7
tRAS ..................................24
CR.....................................1

Advanced Voltage Control:
CPU
Load Line Calibration ................. [ENABLED]
CPU Vcore ..............................[1.375] (try between 1.35v - 1.375v)
QPI/VTT Voltage 1.150v .................[1.375] (try between 1.355v - 1.395v )
CPU PLL 1.800v .........................[1.800]

MCH/ICH
PCIE 1.500v ...........................AUTO
QPI PLL 1.100v ........................1.1v - 1.3v    <<< still experimenting 
IOH Core 1.100v ....................... 1.1v - 1.2v    <<< still experimenting 
ICH I/O 1.500v ........................AUTO
ICH Core 1.1v .........................AUTO

DRAM
DRAM Voltage 1.500v ..............[1.660V]
DRAM Termination 0.750v.......... [AUTO]
Ch-A Data VRef. 0.750v ...........[AUTO]
Ch-B Data VRef. 0.750v ...........[AUTO]
Ch-C Data VRef. 0.750v ...........[AUTO]
Ch-A Address VRef. 0.750v ........[AUTO]
Ch-B Address VRef. 0.750v ........[AUTO]
Ch-C Address VRef. 0.750v ........[AUTO]