** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[pangingIII]

if anyone interested, this's how my bios (voltage section) is done.
i've been using this method with most of my overclocks since i use DDR2 version of the board (EP45-UD3R)



i hope i didn't make any mistake on the picture.


as for my E8400's, i used to adjust MCH ref. (NB GTL_ref.) values as follow....
400-450fsb.... 0.74
467fsb up.... 0.72
480fsb up.... 0.70
500fsb up.... 0.70, 0.68
600fsb.... 0.65/0.64

hope this helps.