I have been trying to get 32m with only 1.375v and finally got it last night. Bios info incl. I wanted to use lowest volts. possible. KHX 9600 rams.
[IMG][/IMG]
Code:
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto 
CPU Clock Ratio .......................: 9 
CPU Frequency .........................: 4.707GHz (523X9)

Clock Chip Control 

Standard Clock Control

CPU Host Clock Control.................: [Enabled] 
CPU Host Frequency (Mhz) ..............: 523 
PCI Express Frequency (Mhz) ...........: 100 
C.I.A.2 ...............................: [Disabled] 

Advanced Clock Control

CPU Clock Drive........................: 800
PCI Express Clock Drive................: 800
CPU Clock Skew (ps)....................: 50ps 
MCH Clock Skew (ps)....................: 50ps 

DRAM Performance Control

Performance Enhance....................: Turbo
Extreme Memory Profile (X.M.P.)........: Disabled 
(G)MCH Frequency Latch.................: 333MHz 
System Memory Multiplier ..............: 2.40D 
Memory Frequency (Mhz) ................: 1255MHz

DRAM Timing Selectable ................: Manual 

Standard Timing Control

CAS Latency Time.......................: 5 
tRCD ..................................: 5 
tRP'...................................: 5 
tRAS...................................: 15 

Advanced Timing Control

Everything In Advanced Timing Control on auto. 
but tRFC 56 and Drive Strength Profiles OC-1200
DDR Write Training: Disable
Motherboard Voltage Control

CPU

Load-Line Calibration..................: [Disabled] 
CPU Vcore..............................: 1.375V
CPU Termination........................: 1.34V
CPU PLL................................: 1.61V
CPU Reference..........................: 0.873  

MCH/ICH

MCH Core...............................: 1.34V  
Reference..............................: 0.768*
MCH/DRAM Ref...........................: 0.910v
ICH I/O................................: 1.5V 
ICH Core...............................: 1.100V 

DRAM
DRAM Voltage...........................: 2.24v
DRAM Termination ......................: Auto 
Channel A Reference....................: Auto
Channel B Reference ...................: Auto