** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[OC Nub]

******Gigabyte EP45 UD3P******

Robust Graphics Booster.........................[ Auto ]
CPU Clock Ratio.................................[ 8 ]
Fine CPU Clock Ratio............................[ + 0.5 ]
CPU Frequency 4.25GHz............................[ 500x8.5 ]

******Clock Chip Control******

CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 500 ]
PCI Express Frequency (Mhz).....................[ 100 ]
C.I.A 2 [Disabled]


******Advanced Clock Control******

CPU Clock Drive..........................[1000mV]
PCI Express Clock Drive................[1000mV]
CPU Clock Skew..........................[0ps]
MCH Clock Skew..........................[50ps]

******DRAM Performance Control******

Performance Enhance.............................[ Standard ]
MCH Frequency Latch.........................[ 333 ]
System Memory Multipler.........................[ 2.40B ]
Memory Frequency 1066............................[ 1200 ]
DRAM Timing Selectable..........................[ Manual ]

CAS Latency Time................................[ 5 ]
tRCD............................................[ 5 ]
tRP.............................................[ 5 ]
tRAS............................................[ 15 ]

******Motherboard Voltage Control******

Load-Line Calibration...........................[ Enabled ]
CPU Vcore [ 1.12125 ]...................[ 1.350v ]
CPU Termination [ 1.20 ]...................[ 1.320v ]
CPU PLL [ 1.50 ]...................[ 1.450v ]
CPU Reference [ 0.760 ]...................[ .861]

MCH Core [ 1.100 ]...................[ 1.360v ]
MCH Reference [ 0.760 ]...................[ .876 ]
MCH/DRAM Reference [ 0.900 ]...................[ 1.000 ]
ICH I/O [ 1.500 ]...................[1.500 ]
ICH Core [ 1.100 ]...................[ 1.100 ]

DRAM Voltage [ 1.800v]...................[2.100v]
DRAM Termination [0.900v]...................[.920v]
Channel A Reference [0.900v]................[1.000v]
Channel B Reference [0.900v]................[1.000v][/QUOTE]

Channel A&B Driving and Timing Settings OC1200-PL8.
Just got some OCZ Reaper pc2 9600, can't get them to run the rated speed with PL8. My Dominator 1066's will do 1200-PL8.