Gigabyte GA-MA790FXT-UD5P Thread

[chew*]

Chew. If possible, can you show me a 4GHz stable with the 955 on this board?

Not asking you to teach me how to overclock here like you stated against above, but just wondering if you have pulled it off.

Like I mentioned in your 955 thread, I'm having all sorts of weird issues. Chip will not accept 1.55Vcore at 4GHz. This voltage creates more instability. Cooling is not the issue.

I'm starting to think that the board needs a new bios revision. Or maybe, its just me or the chip.

More voltage will not help the majority of these chips.....they like low voltage...Honestly I really don't have time to try getting 4 gig stable ( I did it on the ddr II 790FX board ).....I'm very busy and working on other stuff currently.......like specifically ram clocking which is currently horrible with the 955's on this board......

I have stated memory is the KEY to Ocing PHenom II's so this most likely is the source of your issue anyway..........try doing this instead.......And don't use 1600 divider for now.........if you can't get your RAM/NB(IMC) to pass prime blend you will never get the cpu to 4 gig.........You really really need to seperate everything into categories.........then try to mix them together.......Try finding voltage necessary to pass prime with higher NB frequncy with ram and cpu underclocked.........then try with ram clocked.............then turn those down and find voltage needed for a cpu clock only...........then put it all together............

Little tip......errors at 8K, 10K and so on are cpu errors........errors 1024K 768K and such are memory controller/memory related.........

Example memory and NB ( internal memory controller ) clocks combined........These are the new low voltage OCZ animals I'm using here.....1.65v Death to high volt ram kits................