Gigabyte GA-MA790FXT-UD5P Thread

[chew*]

I haven't been very helpfull and active in this thread ( i've been very busy ) so lets get this board worked out.......

First off vdimm and vcore read points.......This is important because you always want to know what you are truly sending to your ram and cpu.....

These are probably not the best points to read them but they are read points none the less.........

My particular board overvolts .02 and in my case thats actually a good thing with some ram i'm testing.......this is rather normal as it differs depending on PSU used ( in my case a PC P@C )

Please please please be carefull if you feel the need to probe around, missing and shorting 2 legs of an IC together will most certainly be catastrophic and most certainly not be covered under warranty.................I probed around untill I found the read points so as to spare someone else the risk of killing a board searching for them...........

circled yellow is vdimm ( optimal read point is likely under that cap near readpoint......kinda hard to get to when board is in a case or laying on a bench )



The Vcore is almost perfect on this board overvolting by only .01

circled yellow is vcore ( the leg to the left of it reads .01 higher, I'm preety sure that is the feed side and the leg circled is consumption side )