Results 1 to 25 of 7441

Thread: ** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

Threaded View

  1. #11
    Xtreme Member
    Join Date
    Apr 2006
    Posts
    132
    UD3P (F9b Bios): LinX (Max Mem) 20X Stable - Y

    Q9550 E0 (L835B166) pack date: 11/11/2008

    Robust Graphics Booster.....................[ Auto ]
    CPU Clock Ratio.............................[ 8 ]
    Fine CPU Clock Ratio........................[ 0.0 ]
    CPU Frequency 4.0GHz........................[ 500*8.0 ]

    ******Clock Chip Control******

    CPU Host Clock Control......................[Enabled ]
    CPU Host Frequency (Mhz)....................[500 ]
    PCI Express Frequency (Mhz).................[100 ]
    C.I.A 2.....................................[Disabled]

    ******Advanced Clock Control******

    CPU Clock Drive.............................[ 1000mv ]
    PCI Express Clock Drive.....................[ 1000mv ]
    CPU Clock Skew..............................[ 0ps ]
    MCH Clock Skew..............................[ 50ps ]

    ******DRAM Performance Control******

    Performance Enhance.........................[ Turbo ]
    Extreme Memory Profile (XMP)................[ Disabled]
    (G) MCH Frequency Latch.....................[ 333MHz ]
    System Memory Multipler.....................[ 2.00b ]
    Memory Frequency (Mhz) .....................[1000 DDR2]

    DRAM Timing Selectable......................[ Manual ]

    CAS Latency Time............................[ 5 ]
    tRCD........................................[ 5 ]
    tRP.........................................[ 5 ]
    tRAS........................................[ 15 ]

    ******Advanced Timing Control******

    tRRD........................................[Auto ]
    tWTR........................................[Auto ]
    tWR.........................................[Auto ]
    tRFC........................................[Auto(52)]
    tRTP........................................[Auto ]
    Command Rate (cmd)..........................[Auto ]

    ******Motherboard Voltage Control******

    Load-Line Calibration [Enabled]
    CPU Vcore [ 1.25 ]...............[ 1.3500 ] (1.328 CPU-Z)
    CPU Termination [ 1.20 ]...............[ 1.28 ]
    CPU PLL [ 1.50 ]...............[ 1.570 ]
    CPU Reference [ 0.760 ]...............[ 0.835 ]

    MCH Core [1.1 ]...............[ 1.32 ]
    MCH Reference [0.760 ]...............[ 0.850 ]
    MCH/DRAM Refernce [0.900 ]...............[ 1.000 ]
    ICH I/O [1.500 ]...............[ 1.500 ]
    ICH Core [1.100 ]...............[ 1.100 ]

    DRAM Voltage [1.800 ]...............[ 2.02 ]
    DRAM Termination [0.900 ]...............[ 1.000 ]
    Channel A Ref [0.900 ]...............[ Auto ]
    Channel B Ref [0.900 ]...............[ Auto ]

    ******Advanced BIOS Features******

    Limit CPUID Max to 3........................[ Disabled ]
    No-Execute memory Protect...................[ Disabled ]
    CPU Enhance Halt (CIE)......................[ Disabled ]
    C2/C2E State Support........................[ Disabled ]
    C4/C4E State Support........................[ Disabled ]
    CPU Thermal Monitor.........................[ Enabled ]
    CPU EIST Function...........................[ Disabled ]
    Virtualization Technology...................[ Disabled ]
    Last edited by spinejam; 04-29-2009 at 06:03 PM.
    i7-920 (3951A424) @4015 w/ HT (191x21) & CM V8
    Asrock x58 Extreme (bios p2.30)
    3x2gb OCZ Platinum DDR3 @1530Mhz (7 7 7 21 1T)
    Asus 5770 @1000c 1400m 1.25v
    2 Samsung F3 1TB Drives in RAID0 (128k stripe)
    2 Samsung SH-203N 20X DVD-RW Drives
    CoolerMaster HAF-922 // Corsair TX650 PS
    Hanns-G HG-281D 28" LCD

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •