Quote Originally Posted by Dark-Energy View Post
Hey all,

I just got my UD3P today to replace my P5Q Pro and so far it's been much better and I can actually OC for once. So far I've gotten to 500 x 8 on my E8400 and things seem to be stable so far. Here's my settings



So, after Blend and small FFT was stable in prime for 1-2 hours I decided to try 8.5 multi and bumped vcore. Primed again on small FFT and no errors but blend would eather error or bsod between 1-10 minutes. I tried various MCH voltage and vtt as well as MCH reference and can't get it stop bsoding or erroring. Must be the extra CPU speed causing something. Any ideas? I also tried 50-100ps CPU clock skew.

Gigabyte UD3P Rev1.11 F9 BIOS
E8400 E0
Powercolor 4850
G.skill DRR2-1000 2x2GB 5-5-5-15 45 2T
Raise your mch reference up 4 steps, should show .800 in ET6 or about .850 in bios if vvt is set to 1.28. Also if your going to stay with 1:1 use the 400 2.00D strap, it should allow you to drop down another PL.