Quote Originally Posted by Ghostleader View Post
I a near future I planning to do some RE test with my Q9650 and some 4x1 and/or 2x2 ram.
cheers Ghost.. new memory for 4GB ?

Quote Originally Posted by eva2000 View Post
Swapped in my very very old and early 2x1GB Cellshock PC3-14400 Micron D9GTR modules and they seem to still hit same 930-950mhz ceiling so either it's bios or me still being a noob in tweaking memory for >1000Mhz speeds

This took 2.17v vdimm - too much can't remember for X48 platform :o
nice runs eva did you need same vDIMM with tRFC48 and 60 ? i need +0.06V for 56 from 60, but 48 is unlikely for mine.

btw, great info in the file names

________

cpu is ok

tested 450x10 again to check chip after higher volts for 5ghz 32M - seems good with same min vcore it had before.

(1.3750 set LLC on / vTT 1.208V)