Quote Originally Posted by scyzer View Post
Thought I might repost my question in this thread as well. (Original Post: http://www.xtremesystems.org/forums/...postcount=2489)

Using a GB EX-58UD5, F5 Bios.

I can't get my 920 to 3.8GHz stable.

I can do 180 fine at:

20x Multi
Vcore 1.3000
QPP/VTT 1.3000
Turbo/HT/All Power Saving Functions OFF
Load Line Calibration Enabled
VDIMM 1.64
PLL 1.80
Memory Multi 8x, Uncore 16x

Memory is a G.SKill PI kit rated at 8-8-8-21 @ 1.6-1.65V

Tried upping volts, using different multipliers (CPU down to 19x, Uncore up to 18x), I SEEM to have 3.7GHz stable with just Vcore upped to 1.4000V (45min of Prime95 so far).

Thoughts?

for 2slick, dropping the mem divider did the trick for him to be stable. Give it a shot and see if you can go higher.