Quote Originally Posted by scyzer View Post
Thought I might repost my question in this thread as well. (Original Post: http://www.xtremesystems.org/forums/...postcount=2489)

Using a GB EX-58UD5, F5 Bios.

I can't get my 920 to 3.8GHz stable.

I can do 180 fine at:

20x Multi
Vcore 1.3000
QPP/VTT 1.3000
Turbo/HT/All Power Saving Functions OFF
Load Line Calibration Enabled
VDIMM 1.64
PLL 1.80
Memory Multi 8x, Uncore 16x

Memory is a G.SKill PI kit rated at 8-8-8-21 @ 1.6-1.65V

Tried upping volts, using different multipliers (CPU down to 19x, Uncore up to 18x), I SEEM to have 3.7GHz stable with just Vcore upped to 1.4000V (45min of Prime95 so far).

Thoughts?

well so far for me i can get 3.8ghz stable with 8+ hr of prime95..
using these settings,

bclk: 200
mul: 19
dram: 1203mhz ( 6x )
unclk: 2406mhz ( 2x )
qpi link speed: ( 18x ) 3600mhz
HT: ON
vcore: 1.35v
cpu pll: auto
qpi/dram: 1.35v
dram: 1.66v