Quote Originally Posted by 529th View Post
The board is under a EK Supreme, 320, 355, 1/2id... will water be enough for 5.4Ghz 24/7 stable?
I think you'll need DI or LN2 for that speed, and it wouldn't be 24/7 in any case. All these high FSB speeds you're seeing are not 24/7 stable. I haven't done a lot of duallie super-high FSB 24/7 testing, but I'd say 533 would be getting near the limit for 24/7 stability. Maybe 550-575 if you're lucky. But then you can't run anything but a 1:1 divider, and have to settle for a looser PL.

9x500 w/ 5:6 divider and PL=8 Stronger is a good goal to reach for.

Quote Originally Posted by Grnfinger View Post
Correct
Gotcha. Makes a lot more sense now.

Someone mentioned how the PL levels on the P45 were 1 number higher for the same value on P35/X38/X48. So, PL=7 on X38 is the same as PL=8 on P45. That being said, I was able to hit PL=6 at similar RAM speeds on my P35 P5K-Premium, and have to use PL=8 on my MIIF. Didn't need pull-ins to do it, but the 90nm chipset boards definitely had an advantage w/ bandwidth.