Murdermod Zeus style

[Yil]

Topper Zeus,

nice clean build!!

Gr Yil

[N19h7m4r3]

I love it Zues!

I builds look very similar, only real difference from the side view is that you have the Dtek block and the EK res.

I even have that Corsair ram cooler on

Good job on the 4GHz also

I've been finding it very hard to get a high stable clock with 8GB ram

I hope you try to get it higher

[Zeus]

Really looking good, Zeus. You've done a nice job with all the detail, and your sleeving is top notch!

Looks awesome Zeus I admire your build given me plans for my new case, but its not a Tenjim though :P

Ninja

Topper Zeus,

nice clean build!!

Gr Yil

Thanks all very much, your comments make it worthwile.

I love it Zues!

I builds look very similar, only real difference from the side view is that you have the Dtek block and the EK res.

I even have that Corsair ram cooler on

Good job on the 4GHz also

I've been finding it very hard to get a high stable clock with 8GB ram

I hope you try to get it higher

I can imagine 8GB of rams makes things more complicated, good luck with it Al.

Having said that, the Corsair Dominators i had purchased recently made the system unstable beyond imagination, even at stock settings.

Yesterday i returned them and asked them for some OCZ platinums, those were not in stock but i'll pick them up as soon as they're in, it's only a 10 minute drive.

For the timing being i'll make do with the Cellshocks and their coldboot behaviour.


This morning i woke up to a nice sunny morning so the first thing that went through my mind was: Pictures!

Whilst cleaning the case, making it free of dust and fingerprints the light faded real fast till it became completely overcast.

I tried the best i could to take some pics but they came out bad, i tried different ISO but the result is somewhat coarse.

I will put 'm on and promise to make better ones when conditions are more favourable.























Here you can see the ledstrip lit up





Two very very nice parts of my life Wouldn't wanna trade the one on the right for all the hardware in the world though.





A little switch to turn the ledstrip off (thanks Sharing for the idea )





I hope you all enjoyed.

[Yil]

á Neis kerel.

Thumbs UP!!!

Where is my bezel?

[shazza]

Great photos! And your daughter is adorable. I think she is very proud of Dad's handiwork, and rightfully so.

[BlueAqua]

Great work Zeus. It's nice to see it all come together in one nice cohesive unit that I'm sure you'll enjoy for years to come.

Any plans for the red SATA cables? They look like they could use some lovin.

[jdmR]

what led strip did u go with

[Yil]

You're welcome.



Thanks.
Yeah Highflow is a nice shop but not the cheapest though.
Have you tried www.aquatuning.de? They sell Bitspower too.



Yeah, finally, sigh... Sorry mate don't know where to get Cellshock anymore.



They look like it but they're not. I've got those:



http://www.aquatuning.de/product_inf...lusskabel.html

here you go

[theseeker]

Beautiful work Zeus!

[dingdong555]

Awesome work man, your daughter is adorable. Keep up the great work!!

[Zeus]

á Neis kerel.

Thumbs UP!!!

Where is my bezel?

The bezel is right here buddy, come over to pick it up man.

Great photos! And your daughter is adorable. I think she is very proud of Dad's handiwork, and rightfully so.

Thanks Shazza, she was watching me taking the pics all the time, asking questions like what's this and what's that?

I decided to put here next to the case to show how big the case really is.

The pic turned out nice so i decided to put it up.

Great work Zeus. It's nice to see it all come together in one nice cohesive unit that I'm sure you'll enjoy for years to come.

Any plans for the red SATA cables? They look like they could use some lovin.

Thanks man! I despise the horrible red cables but it was to only thing i had left.
Black ones are already on their way.

what led strip did u go with

Like Yil said.

Beautiful work Zeus!

Thanks man!

Awesome work man, your daughter is adorable. Keep up the great work!!

Thanks man, i'm close to being finished now.

Things left to do:

-change red sata cables
-get a sidepanel with window or make one in the exsisting panel
-get a new videocard+ FC block
-enjoy my new build

[ILikeCosmosS]

is that ek 150 res correct?
nice build
do those cold cathode lights change the color of tubing( i am going to need non uv cathodes)?

[Zeus]

Nope, it's a 200mm res. This is one of the very first, EK now only makes 150 or 250mm, besides 400mm.

There are no ccfl's in my case, just a strip of 24 white leds.

[Darkninja462]

Great work Zeus, glad to see it turned out excellent.
I wouldn't trade my PC if I had a kid like that either great work
Hope you will do another one to make us dribble again :P

Ninja

[jpm804]

It's been a pleasure to watch this build .... Everything looks great.

How's that AlphaCool LCD working out, software and such.... I like that Nvidia logo you had on there

Also any thought of removing that Alphacool logo like how you removed the silverstone logo..

[Zeus]

Great work Zeus, glad to see it turned out excellent.
I wouldn't trade my PC if I had a kid like that either great work
Hope you will do another one to make us dribble again :P

Ninja

Thanks for the kind words and visiting this thread on regular base.

I did not really plan to make a new build any time soon, at least not for myself.

The computer is great and might look a million dollar, the little girl is absolutly priceless.

It's been a pleasure to watch this build .... Everything looks great.

How's that AlphaCool LCD working out, software and such.... I like that Nvidia logo you had on there

Also any thought of removing that Alphacool logo like how you removed the silverstone logo..

Thanks. I tried removing the alphacool logo like i removed the silverstone logo but it didn't budge. Same goes for the Zalman logo on the fancontroller.

If anyone knows a way to remove both logo's i'd be pleased to hear.

The software for the alphacool display is a bit of a pain as it seems like alphacool could not be bothered to update it.

The plugins it works with are kinda dated and most won't work well with my motherboard or with AMD in general.

Speedfan gives very odd values for voltages, Asus Probe is supported but only very old versions that won't work with my board, everest works but cannot read out the temps of all 4 cores independent and MBM5 won't work with my board either.

It does display some logo's very nicely and it shows the default information from windows.

I will spend some qualitytime with it as the main purpose for me was to let it show voltages and temps actually.

Hopefully alphacool will wake up and update their sofware.

[dreamaxx]

How DID you remove the silverstone logo?

[Mavro Triton 78]

zeus your have a lot of skills keep up bro

[Zeus]

How DID you remove the silverstone logo?

I've been told Goof off works very well.

zeus your have a lot of skills keep up bro

Thanks man.

Tonite i ordered my new videocard, a HD4870 so i'm gonna need a new fullcoverblock.

What do you people think would suit my case best?

EK- copper acetal (my first choice)
EK- copper plexi (lexan?)
EK- nickel plexi

Keeping in mind that the heatpipe on the board is all copper i think a copper block would suit best.

[theseeker]

EK Nickel-Plexi...................



FTW!

[jpm804]

Maybe the HEATKILLER® GPU-X² 4870 LT

Link

or

aquagratiX for HD 4870

[charles_h]

Fantastic job Zeus!

I really look forward to seeing your final shots when the weather decides to cooperate.

[Zeus]

EK Nickel-Plexi...................


FTW!

That truely looks gorgeous but i doubt whether it will suit my build actually, apart from the fuZion mountingplate i don't have much chrome or nickel.

Maybe the HEATKILLER® GPU-X² 4870 LT

or

aquagratiX for HD 4870

Thanks for the suggestions but i personally like the looks of the EK fullcoverblocks the best.

The price is around the same i think?

Fantastic job Zeus!

I really look forward to seeing your final shots when the weather decides to cooperate.

Thanks once again Charles.

Once the new graphics card plus fullcoverblock and black sata cables are in will give the Canon powershot another run for it's money.

[Darkninja462]

Looking good, I'm sure you will make the best/right choice for you build Zeus, my opinion I think the Full Cover Aceatl(black one) would look good.

Ninja

[sharing]

I've been real busy Zeus, (sleeving is a b*** ^^)

By God... Your rig looks wicked!
It's everything I anticipated and more! Job well done sir.

The upgrade to an 4870 is an obvious choice. I'd go for the EK-acetal.
The copper look will blend in nicely with your motherboard cooling indeed.

Nice touch with the switch! You've convinced me to remove the frontpanel aswell.
There are far better uses for it i've been thinking of..

Your daughter is adorible. Such a sweet and innocent face

(nitpicking: Wish there would be a way to remove the Zalman logo from the fancontroller..)