Foxconn Bloodrage-Quantum Force- -X58- -Retail-

[Rammsteiner]

It'll Blck like any other board, no worries.

But your CPU speed is rather low, if you're running at 400Mhz+ higher you need to raise Vcore, meaning VTT might start crapping out as it wants to stay in a certain range (I guess).

My understanding was that the I7's did not like the even multipliers, did you guys try say 19 instead of 20 on the 920 or 21 with the 965, to see if that would allow you to push it higher? I have no problem hitting 200 on mine at 19 and I was booting to 215 with only 1.37vcore, but wasn't even close to being stable, but I bet I can get there. My only problem with going higher than 200 is that my ram is 1600 and so anything higher would require my ram to be overclocked and I am not sure how far it will go, thats the next test.

But does 21x on 920 mean even or uneven multi? In the end you select 20x in BIOS and enable Turbo Boost to have 21x

I could run 20x210 and do one loop of Intelburn Test, BSOD'd the 2nd test. Amount of Volts I needed to have it finish one loop compared to instant BSOD was epic, especially compared to 21x200